TLR TEN-SCTE 2.0 Kit Thread
#2251
Hay Ryan,
I would also like to here what your running for your RX8 setup. Randy also helped me out and said yes to decrease the current limiter to reduce wheel spin.
Thanks
I would also like to here what your running for your RX8 setup. Randy also helped me out and said yes to decrease the current limiter to reduce wheel spin.
Thanks
#2252
Easy fix but if u don't know, u will soon find out!!
#2254
Updated Dakotah Setup
Sorry guys, got some better data...
#2255
OK I was going to ask you in Saturday what your RX8 settings were, but since you brought it up, would you mind sharing? I recall Randy saying that they've been recommending the limiter be dropped down to say 70% as they are finding it really reduces wheel spin and doesn't take away from lap times.
Thanks!!!
Thanks!!!
As always, I will give my disclaimer that brakes are the biggest cause of heat issues and while I set them at 100 in the esc, they are always down between 45-55 on my radio. Definately using the 223 software...so nice! Geared with 14 tooth pinion and stock 40t spur.
current limiter - 80%
drag brake - 12 (this is not for everyone and takes some getting used to)
timing at factory end points and 10%
expo is linear
brake strength at 100 (again turned way down around 45-55 in radio)
neutral width at 32
throttle min at 3
brake min at 0
#2257
Tech Master
iTrader: (9)
Looks like GMK has shock piston drill set!
http://www.amainhobbies.com/product_...ston-Drill-Set
Lol I have same issue and ordered the 275mm tq so I can't run at my local track tonight! Also I'm not gunna read through 150+ pages but found several errors in manual, the biggest one is that the mud guards are side specific, the one with the lip goes on the battery side. They Do not ( or I cannot find a L or R on them) have markings and if u put the battery side on the motor side u cannot slide motor to fit a 14 tooth on it. Just FYI for anyone on the build
Easy fix but if u don't know, u will soon find out!!
Easy fix but if u don't know, u will soon find out!!
Side-Guards (F-1) – When installing the side-guards onto the chassis, at first glance, they look the same, however they are different. One side holds the battery in place and one side allows room for the motor. If you look along the inner edge of the guards, you will notice one has a high spot and the other is low the entire way. The one with the high spot is for holding the battery and is the left guard and the other lower one is the right guard.
Just another reason why the title needs changed so people read the first post like they did with the 22SCT....
TLR 22SCT Thread (Check First Page for FAQ & INFO)
#2258
Tech Master
iTrader: (25)
So I weight this beast... And to my surprise she is no beast...
Calibers mounted: 0.95lbs
7.4v 5000mah lipo: 0.60lbs
Losi scte 2.0 no body: 4.25lbs
Jammin scrt10 no body: 4.3lbs
Losi scte 2.0 no body complete: 5.8lbs
Jammin scrt10 no body complete: 5.75lbs
I was a bit shocked
Calibers mounted: 0.95lbs
7.4v 5000mah lipo: 0.60lbs
Losi scte 2.0 no body: 4.25lbs
Jammin scrt10 no body: 4.3lbs
Losi scte 2.0 no body complete: 5.8lbs
Jammin scrt10 no body complete: 5.75lbs
I was a bit shocked
#2259
Tires
I am picking one if these up this week. What are the best tires and foams for indoor clay?
#2260
So I weight this beast... And to my surprise she is no beast...
Calibers mounted: 0.95lbs
7.4v 5000mah lipo: 0.60lbs
Losi scte 2.0 no body: 4.25lbs
Jammin scrt10 no body: 4.3lbs
Losi scte 2.0 no body complete: 5.8lbs
Jammin scrt10 no body complete: 5.75lbs
I was a bit shocked
Calibers mounted: 0.95lbs
7.4v 5000mah lipo: 0.60lbs
Losi scte 2.0 no body: 4.25lbs
Jammin scrt10 no body: 4.3lbs
Losi scte 2.0 no body complete: 5.8lbs
Jammin scrt10 no body complete: 5.75lbs
I was a bit shocked
#2261
Tech Master
iTrader: (9)
http://prolineracing.com/tires/ion-s...mc-clay-tires/
#2262
Dakota Phend just used the proline IONs at the Cactus Classis and won and i used them on carpet locally and they worked quite well and was very happy with them also!
http://prolineracing.com/tires/ion-s...mc-clay-tires/
http://prolineracing.com/tires/ion-s...mc-clay-tires/
Hows the wear on them on carpet the clay compound ones ? I know i used the Panther Rattler tires Clay compound and they wear fast the foams wear with it the on carpet ! Them JC Pressure points wear good on carpet from my exprience grip good.