R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

Like Tree4Likes
Reply
 
Thread Tools Search this Thread
Old 03-09-2013, 01:27 PM   #1636
Tech Master
 
TCCustoms's Avatar
 
Join Date: Oct 2011
Location: South Central Michigan
Posts: 1,512
Trader Rating: 9 (100%+)
Default

ok guys, working on the rear right now and noticed i dont have all 4 "0" inserts for the hinge pin holders as there are 2 of the "0" and 2 of the "1"....

I thought i needed all "0"s in front and rear hing pin holders so what am i missing?
__________________
1/10 Traxxas Summit Blue
Axial AX10 Scorpion * Viper VSC 240/55t combo * Hitec HS-7954SH
TCCustoms is offline   Reply With Quote
Old 03-09-2013, 01:51 PM   #1637
Tech Elite
 
Grandturk's Avatar
 
Join Date: Jul 2011
Location: NYC
Posts: 3,485
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by TCCustoms View Post
ok guys, working on the rear right now and noticed i dont have all 4 "0" inserts for the hinge pin holders as there are 2 of the "0" and 2 of the "1"....

I thought i needed all "0"s in front and rear hing pin holders so what am i missing?
Manual calls for #1 in front for 3* anti squat. There are additional inserts in the supplemental bag.
__________________
Your Product Name Here
Grandturk is offline   Reply With Quote
Old 03-09-2013, 01:56 PM   #1638
Tech Master
 
TCCustoms's Avatar
 
Join Date: Oct 2011
Location: South Central Michigan
Posts: 1,512
Trader Rating: 9 (100%+)
Default

i dont see anything on the set-up sheet ryan posted or is it the... "0" inserts all around under the front set-up?

Whats everyone running then?
__________________
1/10 Traxxas Summit Blue
Axial AX10 Scorpion * Viper VSC 240/55t combo * Hitec HS-7954SH
TCCustoms is offline   Reply With Quote
Old 03-09-2013, 02:06 PM   #1639
Tech Elite
 
Grandturk's Avatar
 
Join Date: Jul 2011
Location: NYC
Posts: 3,485
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by TCCustoms View Post
i dont see anything on the set-up sheet ryan posted or is it the... "0" inserts all around under the front set-up?

Whats everyone running then?
0 in the front of the rear would be the 1.0 box stock 2* anti squat.
__________________
Your Product Name Here
Grandturk is offline   Reply With Quote
Old 03-09-2013, 02:14 PM   #1640
Tech Elite
 
Grandturk's Avatar
 
Join Date: Jul 2011
Location: NYC
Posts: 3,485
Trader Rating: 5 (100%+)
Default

Ryan - this should be first post material:

http://losi.com/ProdInfo/Files/LOSA1...tion-Sheet.pdf

http://www.losi.com/ProdInfo/Files/A...tallation3.pdf

Adjustable hinge pin settings
__________________
Your Product Name Here
Grandturk is offline   Reply With Quote
Old 03-09-2013, 02:14 PM   #1641
Tech Champion
 
XXXDad's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2007
Location: West Palm Beach, Florida USA
Posts: 6,009
Trader Rating: 195 (100%+)
Thumbs up

In front: all 0's
In rear: 1 up in front half
0 in rear
__________________
☆ Glenn Carlson ☆☆ WPB, Florida☆

☆TLR 22B 3.0 MM ☆ 22T 2.0 MM ☆22B 2.0 MM ☆22-4 ☆ SCTE 2.0☆ ☆
XXXDad is offline   Reply With Quote
Old 03-09-2013, 02:14 PM   #1642
Tech Master
 
TCCustoms's Avatar
 
Join Date: Oct 2011
Location: South Central Michigan
Posts: 1,512
Trader Rating: 9 (100%+)
Default

Quote:
Originally Posted by Grandturk View Post
0 in the front of the rear would be the 1.0 box stock 2* anti squat.
So i have all the stuff Ryan added to the first page printed off and the tuning guide says 3* anti-squat and so does the set-up for anti-squat so i put the 1s in front and 0s in rear for the 3*...right, lol??

I ran all 0's in the SCTE 1.0 as they said they always found them selves back with 0's

BTW..thanks Turk for the help! I would have never noticed all the extra's in that bag til i was done with the build, lol...thanks buddy
__________________
1/10 Traxxas Summit Blue
Axial AX10 Scorpion * Viper VSC 240/55t combo * Hitec HS-7954SH
TCCustoms is offline   Reply With Quote
Old 03-09-2013, 02:16 PM   #1643
Tech Master
 
TCCustoms's Avatar
 
Join Date: Oct 2011
Location: South Central Michigan
Posts: 1,512
Trader Rating: 9 (100%+)
Default

Quote:
Originally Posted by Grandturk View Post
Ryan - this should be first post material: http://www.losi.com/ProdInfo/Files/A...tallation3.pdf

Adjustable hinge pin settings
He has that posted in the Tuning Guide and thats why i posted thats what the set-up sheet says AND the tuning guide says so i took all 0's out and did the 1's in front and 0's in back OF THE REAR holders
__________________
1/10 Traxxas Summit Blue
Axial AX10 Scorpion * Viper VSC 240/55t combo * Hitec HS-7954SH
TCCustoms is offline   Reply With Quote
Old 03-09-2013, 02:20 PM   #1644
Tech Elite
 
Grandturk's Avatar
 
Join Date: Jul 2011
Location: NYC
Posts: 3,485
Trader Rating: 5 (100%+)
Default

Quote:
Originally Posted by TCCustoms View Post
So i have all the stuff Ryan added to the first page printed off and the tuning guide says 3* anti-squat and so does the set-up for anti-squat so i put the 1s in front and 0s in rear for the 3*...right, lol??

I ran all 0's in the SCTE 1.0 as they said they always found them selves back with 0's

BTW..thanks Turk for the help! I would have never noticed all the extra's in that bag til i was done with the build, lol...thanks buddy
No problem.

The 2.0 box setup and Casper setup is 3* anti squat - so yes - 1 up in the front of the rear. The 1.0 box stock was 2* so that's 0 insert in the front of the rear.
__________________
Your Product Name Here
Grandturk is offline   Reply With Quote
Old 03-09-2013, 04:56 PM   #1645
Tech Master
 
TCCustoms's Avatar
 
Join Date: Oct 2011
Location: South Central Michigan
Posts: 1,512
Trader Rating: 9 (100%+)
Default

yup, spanks buddy! Just got the rear on and mounted up so now i just need to sell the pack of wheels and beadlock rings so i can buy some more 22SCT rims...

Hopefully the motor gets here early next week so i can mount it and and decide how to have the esc but everything else should be good and done
__________________
1/10 Traxxas Summit Blue
Axial AX10 Scorpion * Viper VSC 240/55t combo * Hitec HS-7954SH
TCCustoms is offline   Reply With Quote
Old 03-09-2013, 07:28 PM   #1646
Tech Fanatic
 
easye's Avatar
 
Join Date: Nov 2009
Posts: 885
Trader Rating: 3 (100%+)
Default

Was kind disapointed that the kit didn't come with the 22sct wheels.
__________________
b5m tekin r1
rc8b3 werks
rc8b3e hobbywing
leisure hours hobbies and raceway. Ez duz it customs.
Al Richards #1 fan Mr.Mellow #5 fan
easye is offline   Reply With Quote
Old 03-09-2013, 07:44 PM   #1647
Tech Apprentice
 
Join Date: Apr 2008
Posts: 95
Default not so sure

ok just finished my 2.0...things i didnt like were the fact you need 4 foot of motor wire , no radio box or transponder mount ,no esc mount..im not sure my tekin will like riding on the chassis with just a peice of velcro holding it on...also the way the the best placement for the rx8 is with all the post facing the front chassis brace..potential for a short if they ever made contact just right....i havent drove it yet but i hope it drives better than it looks...it does seem more balanced than the 1.0 but man my 1.0 was dialed ...also dont like the bottom shock caps and no shock boots
__________________
sponsors:
trakpower speed equipment,futaba,vp powermaster fuels
M2C RACING
DIRTBURNER RACING
co-ORGINIZER OF THE MICHIGAN STATE CHAMP SERIES
tonytiger is offline   Reply With Quote
Old 03-09-2013, 07:54 PM   #1648
Tech Apprentice
 
Join Date: Apr 2008
Posts: 95
Default

oh yeah and i dont like the fact i need a sensor wire thats a foot long either..i dont have one long enough and neither do any of my local shops..would have been nice had losi announced ahead of time to the hobby shops that they would need a bunch of long sensor wires ,they also should have put an orange sticker on the box stating it needs a long sensor wire...like i said i hope its a beast on the track
__________________
sponsors:
trakpower speed equipment,futaba,vp powermaster fuels
M2C RACING
DIRTBURNER RACING
co-ORGINIZER OF THE MICHIGAN STATE CHAMP SERIES
tonytiger is offline   Reply With Quote
Old 03-09-2013, 07:58 PM   #1649
Moderator
 
bds81175's Avatar
 
Join Date: Jan 2011
Location: Litchfield, Minnesota
Posts: 2,744
Trader Rating: 20 (100%+)
Default

I drove a 2.0 today with the box stock setup and it felt a bit quicker than my 1.0 (1.25?). I'm currently sporting the bump chassis, a modified battery tray, the TLR tuning kit, and the King Headz center diff supports. With my current setup, the truck is just a little over eager to over rotate off power. The 2.0 with the stock setup didn't feel that way. The rear was loose but controllably so. I also drove a Tekno on the same track, box stock. It didn't have quite the same amount of steering and didn't allow me to rotate the car in the corners much. It felt generally planted. Sorry, guys, I didn't get lap times from the two. I'm guessing that the 2.0 was a bit quicker but that may have been because I was more familiar with the platform. They both kick butt and the 2.0 impressed the heck out of me!!! I also got to drive a relatively stock OFNA offering. Unfortunately, his battery was pretty much done when he handed me the radio but what I got from it was lots of steering. Like turn your dual rate down steering. It was a bit tough to tell with the truck that close to lipo cut off but that was what I felt from it.
__________________
Current Racers: AE B6D, Tekno SCT410, Tekno EB48.3
Full Throttle R/C Raceway www.ftrcr.com, Psycho Dog Racing Team, Team Holy Rollers - Greatest RC race team on the planet. Well, at least the team with the best sponsor.
Tekno RC
bds81175 is offline   Reply With Quote
Old 03-09-2013, 08:08 PM   #1650
Tech Master
 
TCCustoms's Avatar
 
Join Date: Oct 2011
Location: South Central Michigan
Posts: 1,512
Trader Rating: 9 (100%+)
Default

Well got it all built and i dont like the amount of room available for my HW SCT Pro as the best way is with the motor wires are in the front of the truck making the wires even longer. I ordered the 275mm sensor wire and if i would have went 300mm i could pry turn the esc but then the esc wire would be rubbing the steering so i dunno just yet what i will do with the esc at this moment but kinda like it sideways and where it partialy sits on the side guard but this will require atleast 2 or 3 strips of tape to make up the gap

I do like the battery knobs as i can sprin 1 semi freely a slide 1 end off and slip the new battery in quick. I havent done the shocks since im waiting on the 22 pistons but will still pry build them with the stock stuff and that will give me time to glue the 22 pistons.
__________________
1/10 Traxxas Summit Blue
Axial AX10 Scorpion * Viper VSC 240/55t combo * Hitec HS-7954SH
TCCustoms is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 11:39 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net