Xray XB4 thread
Tech Regular
It seems like the pro setups for the XB4 use much higher CST oils than pros from other brands. Does Hudy oil CST match up with the CST listed on Team Associated oils?
For reference, this is accurate based on what's printed on their bottles:
Team Associated shock oil wt vs cst
10wt = 100cst
15wt = 150cst
20wt = 200cst
22.5wt = 238cst
25wt = 275cst
27.5wt = 313cst
30wt = 350cst
32.5wt = 388cst
35wt = 425cst
37.5wt = 463cst
40wt = 500cst
42.5wt = 538cst
45wt = 575cst
47.5wt = 613cst
50wt = 650cst
55wt = 725cst
60wt = 800cst
70wt = 900cst
80wt = 1000cst
For reference, this is accurate based on what's printed on their bottles:
Team Associated shock oil wt vs cst
10wt = 100cst
15wt = 150cst
20wt = 200cst
22.5wt = 238cst
25wt = 275cst
27.5wt = 313cst
30wt = 350cst
32.5wt = 388cst
35wt = 425cst
37.5wt = 463cst
40wt = 500cst
42.5wt = 538cst
45wt = 575cst
47.5wt = 613cst
50wt = 650cst
55wt = 725cst
60wt = 800cst
70wt = 900cst
80wt = 1000cst
Going to be putting a trinity D3.5 13.5 motor in an 2017 XB4, what pinion and gear would be best?
Thanks
Thanks
Tech Regular
iTrader: (1)
Xray promised full announcement of XB4 18 today. Never happened....
Tech Champion
iTrader: (259)
Thanks Bent!
Last edited by rraden; 10-14-2017 at 08:47 AM.
Tech Regular
iTrader: (1)
Not many changes this year. Hard to make perfect better I guess. Thanks Bent.
When will they be available?
Tech Regular
iTrader: (6)
slipper delete help
Any help as if needing to go with lighter or heavier diff oil in the front/rear diff with a slipper delete over a center gear diff ?
Tech Master
iTrader: (12)
Bent,
Can you let us know about backwards compatibility? Specifically, I have a '16 - can I bolt my '16 onto the new chassis if I wanted to?
Also would the new gears drop in to a '16? Honestly, the 16 was so good, I'm not sure I need to upgrade but if I ever want to update the car, it's good to know what fits and what does not.
Thanks.
Can you let us know about backwards compatibility? Specifically, I have a '16 - can I bolt my '16 onto the new chassis if I wanted to?
Also would the new gears drop in to a '16? Honestly, the 16 was so good, I'm not sure I need to upgrade but if I ever want to update the car, it's good to know what fits and what does not.
Thanks.
Tech Fanatic
iTrader: (18)
I was wondering, I bought a 2017 XB4 used and went through it and I installed a 78 tooth spur with a 27 tooth pinion and I noticed that the motor screw was slightly rubbing on the slipper plate. Has anyone else founf this issue or do I have something wrong. Thanks
Tech Regular
iTrader: (5)
In 13.5, slipper to slipper delete was just a nice weight savings. Never ran a gear diff with a 13.5, but the gear diff in mod is a bit easier to drive.
Bent,
Can you let us know about backwards compatibility? Specifically, I have a '16 - can I bolt my '16 onto the new chassis if I wanted to?
Also would the new gears drop in to a '16? Honestly, the 16 was so good, I'm not sure I need to upgrade but if I ever want to update the car, it's good to know what fits and what does not.
Thanks.
Can you let us know about backwards compatibility? Specifically, I have a '16 - can I bolt my '16 onto the new chassis if I wanted to?
Also would the new gears drop in to a '16? Honestly, the 16 was so good, I'm not sure I need to upgrade but if I ever want to update the car, it's good to know what fits and what does not.
Thanks.
Bent