DustinEich

iTrader: (34)

Just an FYI the '13 is off as well....

MikeXray

iTrader: (73)

using a .5 on short side is the correct offset right? at least that's what measured out closest on mine.

rcgod

iTrader: (33)

My friend just got his today for his 2014 car so they made some for both the 14 and 15 models. Still waiting on mine.

rcgod

iTrader: (33)

Depends what toe setting you're trying to get to. 1 out on left gives 3.5, 1 in on right gives 2.5, .5 out on left and .5 in on right gives 3.0

kevinpratt823

iTrader: (12)

You need a total of 1 full degree difference between the two sides to get close to correct. That means .5's in opposite directions each side(out on left in on right), or a 1 deg on one side(out on left).

LT FAB

iTrader: (11)

Does anyone know the best place to purchase theses option parts for the 2015 xray ?

2015 Xray xb4

1.Independent servo mount #366220
2.graphite front upperdeck #361173
3.4-Hole alu steering plate #362573
4. Alu central bulkhead #364021
5. Alu rear uprights #363352 Left #363351 right
6. Alu C-hubs 12degree caster #362244 left #362234 Right
7. Center diff spur gears #364978 #364981 #364984
8. Alu diff bevel gear 35t #364945
9. Rear chassis plate #361262
10. Center gear differential #364901
11. Adjustable ball differential # 365000
12. Rear lower suspension holders
RF+2MM #36331 RR+MM #363321
12. Graphite arm stiffeners Front #362190 Rear #363190
13. Drive shaft safety collar #365471-K black

rcgod

iTrader: (33)

http://www.discountrcstore.com/mobil...y.aspx?id=1370

Mizchief

I can only say the kit I ordered from them last Sunday did not have the new hanger, but was opened to insert a letter about it.

I emailed RC america Tuesday and got my new hanger in the mail today! For other reasons tomorrow will be the first day I get it on the track so really no harm no foul for me personally.

I did measure it and it's dead even within the the tolerances of my calipers.

MaricopaAgent

iTrader: (28)

http://www.t2shop.de/epages/61746328...&SearchButton=

timannnn6

iTrader: (140)

Just got mine from amain today and it had the revised part on outside of box (inside outer cover though). So looks like amains kits are good to go.

Norse

iTrader: (43)

The XRAY-shop Austria. Great prices, quick shipping and reasonable. When you sign-in you will see the prices without the 20% VAT. I have ordered several times thus receiving every order within 10 days of placing the orders. They never mark items out of stock as they are able to restock within 5 business days do to there close proximity to XRAY HQ/manufacturing, thus I believe the have a close working relationship with XRAY as well which is another reason they are able to receive new parts stock.



For very nice aluminum rear up-rights, caster blocks which are in the honest aluminum anodized finish(looks great/clean) rear wing mounts, cvd collars(black) and excellent double cardone front swing shafts go to SPEC R Racing. Super fast shipping and excellent aftermarket parts.


Best,

BentKa

Remember that the Xray aluminum rear uprights gives you more roll center adjustments by both allowing more choices on link lengths and heights as well as a greater range of wheelbase adjustment.

The Xray C-hubs also gives you 12* caster for those high bite tracks while the Spec-R is standard 9*.

Same thing with the steering plate where the Xray version gives you more ackermann choices

Just some info to consider when shopping for option parts.

Bent

rraden

iTrader: (259)

For those who are waiting for the updated RR toe block, got mine in the mail yesterday!

suby723

iTrader: (21)

Got mine yesterday also.

raved007

iTrader: (36)

I didn't get mine also i call RCamerica last week and spoke to Brian said they don't have received any replacement but I hope I get this week.