Xray XB4 thread
#2013
Tech Initiate
anti roll bars
Hey,
could some one tell me how many default antiroll bars are included in kit?
In XB4 part list i found 1 , 1.2
but in manual there is a 1 in front susp. 1 in rear so manual suggest there is a 2 antiroll bars 1.2.
could some one tell me how many default antiroll bars are included in kit?
In XB4 part list i found 1 , 1.2
but in manual there is a 1 in front susp. 1 in rear so manual suggest there is a 2 antiroll bars 1.2.
#2014
The Kit came with 2 - 1.2 roll bars and they are the same for front and rear. They are available as options in 1.0, 1.1, 1.2, 1.3, 1.4. 1.6, 1.8.
#2015
Tech Initiate
Thanks,
soo kit contains:
303431-K ALU 4.9MM BALL END - BLACK (4)
303454 BALL JOINT 4.9MM - OPEN (8)
362472 ANTI-ROLL BAR 1.2 MM - 2
?
soo kit contains:
303431-K ALU 4.9MM BALL END - BLACK (4)
303454 BALL JOINT 4.9MM - OPEN (8)
362472 ANTI-ROLL BAR 1.2 MM - 2
?
Last edited by farm; 04-02-2013 at 02:01 PM.
#2018
Tech Initiate
#2019
My Ralls Racing XB4 shock towers have arrived today:
Can't wait to get them fitted and tested this weekend. Hopefully they will sort out the back end problem I'm having.
They are from Ralls Racing in the UK. http://www.rallsracing.com/ [email protected]
"Made from 4mm black grp and extensively developed and tested by the shop team. They offer added strength without extra load on the bulkhead due to the flex nature of grp, and an extra row of camberlink holes
We have found the extra camberlink holes have helped to nail the back end of the car down stopping the over rotation, squaring the car up quicker and allowing us to get on the power earlier out of a turn"
Can't wait to get them fitted and tested this weekend. Hopefully they will sort out the back end problem I'm having.
They are from Ralls Racing in the UK. http://www.rallsracing.com/ [email protected]
"Made from 4mm black grp and extensively developed and tested by the shop team. They offer added strength without extra load on the bulkhead due to the flex nature of grp, and an extra row of camberlink holes
We have found the extra camberlink holes have helped to nail the back end of the car down stopping the over rotation, squaring the car up quicker and allowing us to get on the power earlier out of a turn"
#2020
I'm using these: http://www.maplin.co.uk/silicon-washers-99272
Two on each shock shaft bottom. They are nice cushiony bump stops, and work well for me.
#2021
Also just fitted:
Yaiba Racing XB4 Woven Graphite Long Upper Deck V.2 - YRG070
It's available from MB Models: http://www.rccarshop.co.uk/index.php...r-deck-v2.html
Yaiba Racing XB4 Woven Graphite Long Upper Deck V.2 - YRG070
It's available from MB Models: http://www.rccarshop.co.uk/index.php...r-deck-v2.html
#2024
Also just fitted:
Yaiba Racing XB4 Woven Graphite Long Upper Deck V.2 - YRG070
It's available from MB Models: http://www.rccarshop.co.uk/index.php...r-deck-v2.html
Yaiba Racing XB4 Woven Graphite Long Upper Deck V.2 - YRG070
It's available from MB Models: http://www.rccarshop.co.uk/index.php...r-deck-v2.html
#2025