Xray XB4 thread
#7546
Hey advpball,
Outdoor season in Wisconsin. Actually the local outdoor facility being SilverFox RC Raceway is just across the Mississippi River outside LaCrescent Minnesota.
It is a Great facility with a great owner whom is also a good friend of mine.
Outdoor season in Wisconsin. Actually the local outdoor facility being SilverFox RC Raceway is just across the Mississippi River outside LaCrescent Minnesota.
It is a Great facility with a great owner whom is also a good friend of mine.
#7551
Tech Elite
iTrader: (33)
Just start reading from there. There is info on what the problem is and how to use offset bushings to fix it. If yours is off you should be able to see it with your eyes, or if you have calipers you can check it. Unless xray is sending revised mounts in the kits yours will be off too.
#7552
Tech Apprentice
iTrader: (1)
Just start reading from there. There is info on what the problem is and how to use offset bushings to fix it. If yours is off you should be able to see it with your eyes, or if you have calipers you can check it. Unless xray is sending revised mounts in the kits yours will be off too.
#7554
Ive been running stock except run the progressive springs.8k front and rear
just put middle diff in with 100k.
love it!!
just put middle diff in with 100k.
love it!!
#7555
Tech Master
iTrader: (15)
Quick question: the '15 front shock tower has two holes, if it were compared to the '14 tower, which hole was eliminated? The bottom one?
While I'm at it, does anyone here run at OCRC with their Xray? What do you think of Martin Bayer's set up vs. your own? TV?
While I'm at it, does anyone here run at OCRC with their Xray? What do you think of Martin Bayer's set up vs. your own? TV?
Last edited by HeavyD99; 03-14-2015 at 10:40 AM.
#7558
#7560
I think for the center diff Xray suggest 500k cst for low traction and 1000k or 1 mil cst for high traction.??