Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#9556
Tech Master
iTrader: (33)
I went up to rjd hobbies for the boss man benefit race. Didn't last long before that picture was takin lol. 2 hour drive for a 10 minute practice. No one else had an rb6. The hobby shop there doesnt carry kyosho, and I didn't have a spare arm or shock shaft. I do now! Lol
Yes that's the piece. Is there a picture of how it's installed?
#9559
Tech Champion
iTrader: (68)
Hello everyone in kyosho land....I'm planing to get one of these rb6 cars in a few weeks. I have read through much of the thread,all very good information. Was the "durability issue" the thin rear chassis under the gearbox, and has that now been mended? I plan to run this car in RM configuration, as I don't want to shell out money right away for a new set of springs unless I have to, and it seems the stock springs are more RM friendly. I will probably put a 17.5 in to start, then go to a mod motor later.
Any tips to share with me? Anything that has to be done?
Any tips to share with me? Anything that has to be done?
#9560
Tech Master
iTrader: (43)
Hello everyone in kyosho land....I'm planing to get one of these rb6 cars in a few weeks. I have read through much of the thread,all very good information. Was the "durability issue" the thin rear chassis under the gearbox, and has that now been mended? I plan to run this car in RM configuration, as I don't want to shell out money right away for a new set of springs unless I have to, and it seems the stock springs are more RM friendly. I will probably put a 17.5 in to start, then go to a mod motor later.
Any tips to share with me? Anything that has to be done?
Any tips to share with me? Anything that has to be done?
Durability is great - only things I've broke happened at high rates of speed into very solid objects. I believe the thin part at the rear has been resolved, issues w/ the initial production kits.
I too run RM. I started RM, switched to MM, now back at RM. Very versatile car... Can't say enough good things about it. Oh, and welcome to the Red Army...
#9561
The thin chassis is was first run only, and was cosmetic only...
#9564
What springs are everyone running In mm configuration
#9565
Does the avid top shaft fits the stock slipper?
http://www.amainhobbies.com/product_...minum-Topshaft
http://www.amainhobbies.com/product_...minum-Topshaft
#9566
Does the avid top shaft fits the stock slipper?
http://www.amainhobbies.com/product_...minum-Topshaft
http://www.amainhobbies.com/product_...minum-Topshaft
Ciao,
#9567
#9568
Tech Champion
iTrader: (73)
Does the avid top shaft fits the stock slipper?
http://www.amainhobbies.com/product_...minum-Topshaft
http://www.amainhobbies.com/product_...minum-Topshaft