Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#7188
You got any pics of this?
#7189
Tech Champion
iTrader: (22)
just picture 8th scale wing mount.....how you screw the wing in from the top.
cut the nipple off on the existing wing mount so that the top of it is flat. take a small drill bit and make a hole. Use 4-40 screws (they tap plastic better) and thread the screw all the way down through the mount. put a lock nut on the other side when done.
Tip.....use a 3/32 cap head screw to 'tap' the threads. then switch to a 1/16th counter sink along with a counter sink washer for a cleaner look after you have the hole cut right
cut the nipple off on the existing wing mount so that the top of it is flat. take a small drill bit and make a hole. Use 4-40 screws (they tap plastic better) and thread the screw all the way down through the mount. put a lock nut on the other side when done.
Tip.....use a 3/32 cap head screw to 'tap' the threads. then switch to a 1/16th counter sink along with a counter sink washer for a cleaner look after you have the hole cut right
#7190
Did you get an M3 screw to work?
#7196
#7198
Rb6 wanted
Hi Guys,
Looking for an RB6 roller, anyone have one they want to offload? PM Me.
Looking for an RB6 roller, anyone have one they want to offload? PM Me.
#7200
Why do some run the rb-5 front axle on the 6?