Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#437
Press release pic is mid motor, supernats pic is rear.
#438
I never said you can't run the car box stock either, more power to you
#440
Was tebo running the SP2 or the WC front hinge pin holder on the RB6? I know it was blue, as shown in the previous pics, but it is hard to tell which one it is. In the manual, it appears the hinge pin holder and the bulkhead have new part numbers. Anyone know if they are different? Or which version he was using?
Also did he have red or pink springs in the rear? The color was hard to decipher.
Also did he have red or pink springs in the rear? The color was hard to decipher.
#443
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
^^^^
Ride height varies but you can start with front arms level and rear bones level, toe varies as well but I run 1 degree negative camber front and rear and no toe. 48p gears. Single stIck or shorty pack and 12 mm hexes all around.
Ride height varies but you can start with front arms level and rear bones level, toe varies as well but I run 1 degree negative camber front and rear and no toe. 48p gears. Single stIck or shorty pack and 12 mm hexes all around.
#445
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
Close. 23-25 is about right. That is just me....the other guys may have better info.
#448
Will the rb5 pitbull body work on rb6?
#449
Super Moderator
iTrader: (81)
With the way the chassis is laid out and with the increase in length it obviously won't be a direct fit. If you put it on there I expect it to distort the body into something that just won't work as good as the stock body.
This is all speculation on my part though. When I decide to get one I won't be using the body off of my RB5.
This is all speculation on my part though. When I decide to get one I won't be using the body off of my RB5.