Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#347
I wouldnt be so quick to ditch the rb5,its proven and one of the best buggies out,to early on the rb6 to tell cld take alot of time to setup who knows..
#349
Tech Adept
I have a question...
It seems that the new car has some new features in the front end like the new caster blocks...how do these bits work? You just add a little more caster or there is something else they do bcause there is the option of putting the block position in and out..
It seems that the new car has some new features in the front end like the new caster blocks...how do these bits work? You just add a little more caster or there is something else they do bcause there is the option of putting the block position in and out..
#350
im anxious as heck..
#352
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
#353
I have a question...
It seems that the new car has some new features in the front end like the new caster blocks...how do these bits work? You just add a little more caster or there is something else they do bcause there is the option of putting the block position in and out..
It seems that the new car has some new features in the front end like the new caster blocks...how do these bits work? You just add a little more caster or there is something else they do bcause there is the option of putting the block position in and out..
On the RB6, with different blocks you can maybe set the width of the front.
#355
The new caster blocks have vertical ballstud adjustment. Not sure if anything else is different, but that much is visible in the pictures and on the parts explosion.
Edit- I just looked at the parts explosion again and you can see it has an offset spacer for the hingepin (manual shows three sets on the parts tree), which would would make the track adjustable, via moving the kingpin in relation to the arm. Also the manual shows the steering arms and rack on a parts tree so I doubt it's alloy in the kit.
Edit- I just looked at the parts explosion again and you can see it has an offset spacer for the hingepin (manual shows three sets on the parts tree), which would would make the track adjustable, via moving the kingpin in relation to the arm. Also the manual shows the steering arms and rack on a parts tree so I doubt it's alloy in the kit.
Last edited by Eric Tomczyk; 08-10-2012 at 05:07 PM.
#359
Yes it's the same, the RM tranny is identical except for the wing mounts are now integrated into the case.
Infernos Only has an RB6 parts section up and they are listing most of the parts and offering preorders on parts too. FYI the alloy chassis is $109.99!!!
Infernos Only has an RB6 parts section up and they are listing most of the parts and offering preorders on parts too. FYI the alloy chassis is $109.99!!!