Alan_r

I was going through cleaning and freshening the diff in my 210R today and happened to notice the color of the slipper spacer being different then my others. So I went to my spares box and sure enough, one pack had a silver one, another pack had a bronze colored one. Wasn't there an issue a while back with excessive wear that resulted in a material change out? Which color is the stronger of the two? I swear I remember it being the silver one but just want to double check before putting it back together.

Kremzeek

iTrader: (8)

I remember that too but I think mine are all bronze-ish in color

Kremzeek

iTrader: (8)

Looks like the bronze is the updated part.

Team Durango DEX210 - Slipper spacer wear

JRSlash

iTrader: (7)

Well gents. I finally give up and posted my SC truck for sale. I am wanting to get a nitro car so I am getting rid of this one. Bada$$ truck tho.

Airlmeier4422

iTrader: (10)

Anyone have a chassis for sale? Type B chassis, exotek, plan B or any other branded chassis will work.. Got enough parts to create a new SCT. Thanks

czrlaker

iTrader: (34)

platgof

iTrader: (4)

I swapped out my 10.5 and installed an 8.5 motor. I also installed a Sanwa 482 rx as well. Now I am ready.

czrlaker

iTrader: (34)

Im running a 10.5 and damn its fast. My problem is traction roll because I run on carpet. Seems like every turn im on my lid. I modified a set of desc410 swaybars to fit last night. If this works I'll keep it. If not selling it because I mainly run on carpet.

platgof

iTrader: (4)

My new track is carpet and I am in for a huge learning curve.

czrlaker

iTrader: (34)

Plenty of guys run Losi 22sct and SC5M's here. I used to run an sc5m and had it dialed. Sold it to fund some motorcycle parts. Picked up this rango off of a trade because I missed short course. Seems like it will be difficult to dial it for carpet. Might just stick to my DESC410 2wd conversion for now.

Kremzeek

iTrader: (8)

Drop your ride height way down. I've also dialed out a lot of droop on mine.

Here's the swaybar I recently put on my truck. I've only been out once so far this season, but it seems to help some.



What tires are you guys running on carpet?

czrlaker

iTrader: (34)

Pinpoints (two rows on the inside and one on outside shaved down all the way around) , I have it really lowwww. I'll try to work on the droop. Seems like the camber mounts (strc tower) sit really low, almost below the camber mount on the hubs. I'll try a longer ballstud to fit more washers hopefully raising the roll center slightly. The roll bars seem to make a huge difference. But won't be able to test until Sunday.

Kremzeek

iTrader: (8)

Most of the guys around here are using foams or are like me and using clay slicks and just sauce them.

czrlaker

iTrader: (34)

Sauce not allowed @ our carpet track.

Kremzeek

iTrader: (8)

Because the smell? Our track only allows odorless stuff like SXT. Before that, I used to get a headache every time I went to the track.