"necessary" slash upgrades?
#1
"necessary" slash upgrades?
What would people suggest the "necessary" slash upgrades are, in order of importance?
#3
Bashing, primarily.
#4
I would do the front and rear hubs and caster blocks waaay before I replaced the nerfbars (?!)
#5
Tech Lord
iTrader: (38)
If your racing the SSC LCG chassis would be #1..you don't need anything else..*this is if your starting with a platinum or ultimate*
The stock bumpers are fine..the RPM bumpers weigh a ton, especially the front makes the Slash nose dive bad over the bigger jumps, the RPM A arms & shock towers are a good upgrade..I didn't care for the RPM nerfs, they make some body's fit funny..as in they stick out to far.. taking the grease out of the diffs and putting in diff fluid would be a good hop up..
The stock bumpers are fine..the RPM bumpers weigh a ton, especially the front makes the Slash nose dive bad over the bigger jumps, the RPM A arms & shock towers are a good upgrade..I didn't care for the RPM nerfs, they make some body's fit funny..as in they stick out to far.. taking the grease out of the diffs and putting in diff fluid would be a good hop up..
#6
Proline rear skid plate - avoids breaking chassis at rear mounting points
RPM f/r hubs and caster blocks
STRC aluminum steering rack
Kimbrough or some type of HD servo saver
RPM f/r hubs and caster blocks
STRC aluminum steering rack
Kimbrough or some type of HD servo saver