ReV:-O

Hey guys,

I'm having trouble braking with my Vorza with a MMM combo in it. The brake is set to 50% power, but as soon as i tap it, it sends it into full brake. How can i set it so that the brake is proportional to the amount of actual brake i give it on the transmitter?


Thanks

mellen_mpz

iTrader: (9)

Im thinking maybe that is 50%???? Have you tried backing off even more or dialing down the brake channel on your transmitter???

Derry

iTrader: (27)

Set end points to 100% and do the initial setup on the speedo...

ReV:-O

I've done all that. I'm thinking I need to adjust the brake curve on the MMM itself?

mellen_mpz

iTrader: (9)

Can you explain a little better what is going on? Is it locking up the brakes with even a tiny amount of brake applied?

SlaminRC17

iTrader: (47)

I run the brake on my Mamba 1/8 scale speedo's at like 15% for racing, and its still a little on the strong side...

Kevin

ReV:-O

Yes thats correct. It appliest the same amount of brake even if i slightly tap it, or if i apply it fully