bajabro

iTrader: (6)

Need some setup help for my buddy. We are running on a large indoor track with 100+ ft straight away. Need gearing and esc settings. Thanks in advance for any help.

lowroad

iTrader: (79)

25/75 gearing works pretty well for me and many others. Setups, I would just pull a pro's from rc10.com

bajabro

iTrader: (6)

Thanks. Don't need suspension setup. We need esc settings.

rcbo

iTrader: (44)

Don't know about a Murfdog.It works well on a Duo.
http://www.fantomracing.com/motor_se...0SC%2017.5.pdf

bajabro

iTrader: (6)

Thanks

Randy_Pike

iTrader: (6)

Again not a Murffdogg setup but a good place to start:

http://www.teamtekin.com/hotwire/ESC...XXTsct_212.pdf

Rampokker

iTrader: (9)

You can also pm Matt (username "Murfdogg") for a good setup. He's done a lot of testing with the tekin rs/rs pro speedos along with his motors.

GizmoJunkie

iTrader: (5)

75/25 works pretty well as a starting point for a med-larger size indoor track.

Im on a small track now running tekin rs, 17.5 with 78/23, 81/24.

I havent tried the Murfdogg motors yet. Theres a bunch of D3/ION3s around here so i stick with those.

rednck21

iTrader: (106)

any heat issues with that gearing?

GizmoJunkie

iTrader: (5)

There is at TT! I ran a ballistic 17.5 nonboosted and started with this at one point and that motor got HOT!

rctouringracer

iTrader: (5)

No boost 75-25, with boost 78-25, small to mid sized clay med-high bite, technical, 8-10min. This is personal experience. Do not add timing to can. Watch your temps! Try not to go over 160*. makes less torque when she's hot. I own 3 of these jewels & all three have different personalities....