Hyper TT 4wd 1/10th Truggy Thread
#2431
hey
Where do I get the bumpers everyone is talkin about....btw love this truck
#2432
#2433
Hey guy's,I just purchase a used Hyper TT on the forums,and have a couple questions? Do I need to use loctite on the pinion gear? and do i need to re-loctite the CVD"S /center driveline with the good loctite? red or blue?
Thanks for your help,
Thanks for your help,
#2435
#2436
i just want to know how you move forward battery tray and i like my esc sit behind battery tray .
#2437
Tech Elite
iTrader: (124)
if anybody needs NEW tt tires mounted with pro-line closed cell foams here is the link......the only reason i'm selling is the stock tires are not the best for my new track.
http://www.rctech.net/forum/r-c-item...ell-foams.html
http://www.rctech.net/forum/r-c-item...ell-foams.html
#2438
Tech Rookie
Saddle pack for TT
I have been looking at a TT that has a saddle pack setup. Is this a good setup or should I stay away from it? I did see one other for sale on this forum and it looked pretty sweet. Thanks in advance,
#2440
Tech Rookie
#2441
First day out with the TT was decent. I ran a 6.5 540 can and rx8 in sensorless mode. The top end was good, but I could use a little more torque. I have a 550 5.5 coming. Got a few questions...
What pinions are you guys running with 550 5.5 ballistic?
I don't have enough steering. I haven't measured it, but it seems like in it's stock setup, there isn't enough throw. Any tips here?
THe car is nose heavy. I knew this beforehand, but I had no idea it would be to this extent. I think I could get use to it, but are you guys doing anything for this?
What pinions are you guys running with 550 5.5 ballistic?
I don't have enough steering. I haven't measured it, but it seems like in it's stock setup, there isn't enough throw. Any tips here?
THe car is nose heavy. I knew this beforehand, but I had no idea it would be to this extent. I think I could get use to it, but are you guys doing anything for this?
#2442
I'm running the RSPro and Redline 6.5 (540) and have gobs of power, torque and top end. Running it with an 11t pinion. I still think the 1/8th scale/550 stuff is too big for this truck and messes with balance.
It's not nose heavy so to speak, it's the driveline drag and inertia of the wheels. Over rollers or doubles you need to give it a little continuous throttle, don't just let off or dump it in the air or it will do front flips for sure.
It's not nose heavy so to speak, it's the driveline drag and inertia of the wheels. Over rollers or doubles you need to give it a little continuous throttle, don't just let off or dump it in the air or it will do front flips for sure.
#2443
Tech Addict
iTrader: (5)
I having a bad time installing everythin
i have 550 novak with a GTB2 Esc but.... the servo arm seem to push against the esc , i tried to put it further but it only connects to half velcro,,,
on top it's impossible EXEPT if i remove the fan.......
but i dunno what you guys manage to do to even get it running so war im just trying to fit stuff around in a very fit ca
PS: like squirell said even the servo mount against the shell..... thats kind of a issue too
i have 550 novak with a GTB2 Esc but.... the servo arm seem to push against the esc , i tried to put it further but it only connects to half velcro,,,
on top it's impossible EXEPT if i remove the fan.......
but i dunno what you guys manage to do to even get it running so war im just trying to fit stuff around in a very fit ca
PS: like squirell said even the servo mount against the shell..... thats kind of a issue too
#2444
I put my ESC on top of the top center plate for better ventilation. No problems with clearance.