Hyper TT 4wd 1/10th Truggy Thread
#3256
#3258
If you have the extra $ in the future, get the Mamba Max Pro esc. It is much smoother than the SideWinder with this motor. I am ordering 3s this week to try also... Then i need a new lid...
#3259
Tech Elite
iTrader: (110)
I'm at 14/42 with SW 3800/no fan, and the hottest I ever got was 130. That was from doing non stop speed runs for a whole 2s 5000 40c pack. On the track I never break 110. I'm gonna try 15/42 this week,looking for more top end. I was thinking of going up to the 4600 4 pole but I think I might just stay with the 3800.
#3260
I'm at 14/42 with SW 3800/no fan, and the hottest I ever got was 130. That was from doing non stop speed runs for a whole 2s 5000 40c pack. On the track I never break 110. I'm gonna try 15/42 this week,looking for more top end. I was thinking of going up to the 4600 4 pole but I think I might just stay with the 3800.
I'm actually thinking about going to the Novak 550 can 4.5T motor.. I want more speed on 2s...
#3262
Have anyone run dog bones for front and rear? The stock CV in front always bend and wondering if the dog bone would be better option for front instead of always bending it back.
#3263
Tech Initiate
strc used to have good cvds..
shock wise i am running
front : 35w, white springs and single hole piston.
rear : 70w, orange springs, stock piston.
packs up the rear real good when jumping good rebound, doesnt squat that much on throttle.
on bumpy tracks hard pack tracks, car tracks well.
ESC: hobbywing xerun 60a..
Motor: hobbywing 4000kv
pinion: 15 going 14. for heat management.
shock wise i am running
front : 35w, white springs and single hole piston.
rear : 70w, orange springs, stock piston.
packs up the rear real good when jumping good rebound, doesnt squat that much on throttle.
on bumpy tracks hard pack tracks, car tracks well.
ESC: hobbywing xerun 60a..
Motor: hobbywing 4000kv
pinion: 15 going 14. for heat management.
#3264
#3265
Some nice shiny bits for my TT
#3266
opinion needed,
Do i go 3s with the MMP and 3800 or find a Novak 4.5 550 can motor and stay 2s in this platform....
Do i go 3s with the MMP and 3800 or find a Novak 4.5 550 can motor and stay 2s in this platform....
#3267
Tech Adept
Go with Novak.More torque,less weight (3s vs 2s) and cheaper batteries.
#3268
I use the 2700kv 120a on 3s in mine and that outruns my brothers novak 4.5t 550..
It runs perfect with no heat problems and a 15t pinion
http://www.rc-fans88.com/details.asp?prodid=2659
#3269
Tech Adept
Depends on the skill and the driving style...
And the truck setup of course.
And the truck setup of course.
#3270