Hyper TT 4wd 1/10th Truggy Thread
#3241
Hyper TT up for sale
I am selling my Hyper TT as a roller 120.00 shipped anywhere in the 48 states. If interested I can send you some pic's. I will have it posted here in the FS section tonight. [email protected]
#3242
Tech Elite
iTrader: (7)
Do the proline SC shocks mount up well? I imagine you would use the fronts:
http://prolineracing.com/performance...-shocks-front/
with these:
http://prolineracing.com/performance...-hardware-kit/
http://prolineracing.com/performance...-shocks-front/
with these:
http://prolineracing.com/performance...-hardware-kit/
#3243
Tech Elite
iTrader: (7)
Took my TT along with me on my mountain bike ride today. Went to the BMX jumps and had a ball. This truck is so darn tough! Didn't break anything (that I know of) but the chassis slapped almost every time. What do you expect when you are 20 feet in the air?
http://www.youtube.com/watch?v=o0DB-lN5czs
http://www.youtube.com/watch?v=dsi1gG99uZU
http://www.youtube.com/watch?v=o0DB-lN5czs
http://www.youtube.com/watch?v=dsi1gG99uZU
#3244
very nice! What system are you running?
#3246
The 3800 system? That truck looked very quick.
Yes you catching it was cool.
wish we had a track like that around here..
thanks for sharing
Yes you catching it was cool.
wish we had a track like that around here..
thanks for sharing
#3247
Cool vids bro, what gearing are you running with the 3800kv?? and i take it you have the Sidewinder SCT esc in there aswel??
#3248
My TT
#3250
Can anyone guide me towards a god setup on the shocks, witch springs and what oil wt.
Trackconditions are smooth clay with some good jumps, not too big...
Thanks
Trackconditions are smooth clay with some good jumps, not too big...
Thanks
#3251
#3252
My ride:
Since pictures:
Response from the Mamba Max ESC (with 4600Kv motor) is very bad. I don't run throttle punch, no exponential curve, etc. All stock. Still the throttle response sucks. Like it has turbo lag; at first nothing happens and then it blasts off uncontrollably...
Now changing to a new Sidewinder SCT 3800kv combo I also run (and love) in my SC10. If that doesn't work will switch to RX8 + pro4
Love this little truck! A lot of fun to drive! Just the ESC...
Since pictures:
- changed tires and wheels to Goosebumps on HPI 6 spoke
- Changed shock oil; 35w front and 25w back
- Put 5K oil in center diff
- Replaced motor fan that was pulling too much amp
Response from the Mamba Max ESC (with 4600Kv motor) is very bad. I don't run throttle punch, no exponential curve, etc. All stock. Still the throttle response sucks. Like it has turbo lag; at first nothing happens and then it blasts off uncontrollably...
Now changing to a new Sidewinder SCT 3800kv combo I also run (and love) in my SC10. If that doesn't work will switch to RX8 + pro4
Love this little truck! A lot of fun to drive! Just the ESC...
#3253
Tech Elite
iTrader: (7)
It's too hot to keep my fingers on the ESC fins for more than 2 seconds when it's at operating temperature. I don't know if this ESC just runs hotter than most. It's not affecting the performance in any way.
Do the proline SC shocks mount up well? I imagine you would use the fronts:
http://prolineracing.com/performance...-shocks-front/
with these:
http://prolineracing.com/performance...-hardware-kit/
Do the proline SC shocks mount up well? I imagine you would use the fronts:
http://prolineracing.com/performance...-shocks-front/
with these:
http://prolineracing.com/performance...-hardware-kit/
#3254
It's too hot to keep my fingers on the ESC fins for more than 2 seconds when it's at operating temperature. I don't know if this ESC just runs hotter than most. It's not affecting the performance in any way.
Do the proline SC shocks mount up well? I imagine you would use the fronts:
http://prolineracing.com/performance...-shocks-front/
with these:
http://prolineracing.com/performance...-hardware-kit/
Do the proline SC shocks mount up well? I imagine you would use the fronts:
http://prolineracing.com/performance...-shocks-front/
with these:
http://prolineracing.com/performance...-hardware-kit/
The ESC is too hot if you can not touch it for more than 2 seconds. It may work fine now, but it will burn up faster with that kind of heat. I would put the motor fan on the esc or gear down.
For the fan, some just use double sided tape on the lower inside edges and stick it on. I did that plus zipties on the outer part you would use if you put the fan on the motor. It kept my esc temps down to 100 on average.
#3255
Tech Elite
iTrader: (7)
The ESC is too hot if you can not touch it for more than 2 seconds. It may work fine now, but it will burn up faster with that kind of heat. I would put the motor fan on the esc or gear down.
For the fan, some just use double sided tape on the lower inside edges and stick it on. I did that plus zipties on the outer part you would use if you put the fan on the motor. It kept my esc temps down to 100 on average.
For the fan, some just use double sided tape on the lower inside edges and stick it on. I did that plus zipties on the outer part you would use if you put the fan on the motor. It kept my esc temps down to 100 on average.