slash shock pistons
#1
#3
Tech Master
the smaller ones go inside the top of the shock tower, thru the shock and mount to the body post mount;the bigger ones are for inside the shock cap for 2 or 3 hole pistons.
#4
k i will look into it
#5
Super Moderator
iTrader: (31)
Join Date: Nov 2008
Location: RIP 'Chopper', 4/18/13 miss you bud:(
Posts: 15,475
Trader Rating: 31 (100%+)
They are used to replace the stock shouldered screws that come in the slash. You can use those bushings with a standard 4-40 screw and nut to mount the top of the shock to the shock tower.
#6
hey thanks for the info.... probably wont use them but will keep them around just never know.... thanks guys