80LikesDurango DEX210 Thread
11-11-2011, 05:53 PM
#1801
11-11-2011, 06:32 PM
#1803
Tech Rookie
Hey guys another diff question. I have it all assenbled and in the gearbox and installed it in the car. I put the hubs and the driveshafts in the car. On the side of the diff where the nut is inside of the outdrive, it seems like the dogbone doesn't go in very far and would rub up against it when the suspension compresses? How do I know how far it should be in there or if there is something wrong? The screw is threaded down in it pretty good and is pretty tight. Anybody else notice this or once I have everything installed and the camberlinks on it it will be fine? Please Help!!!!!
11-12-2011, 06:59 AM
#1805
11-12-2011, 11:37 AM
#1807
Tech Addict
It'll do
11-12-2011, 12:55 PM
#1808
I just threw down on a 210. Need a little help or opinions please.
AE shock oil conversion: Since I have a lifetime supply of it, was thinking the usual 30 in front, 27.5 rear? Use stock pistons?
Initial Build: Any weird hiccups in the build? Like inherant issues or things to just look out for? Or is it pretty straight forward? Thanks!! Does the kit come with rims? I know no tires.
Parts stash: I ordered some shock towers and was thinking to get A arms, HD Ball End Set, but anything else to "stock up" on? I know it's a stout car, but something has gotta break right?
In the 410 thread, people were recomending these (TDR330037 ....Suspension Arm Pivot Ball) for the 410r, but does the 210 need these, or do they come already with it stock?
Thanks!!
AE shock oil conversion: Since I have a lifetime supply of it, was thinking the usual 30 in front, 27.5 rear? Use stock pistons?
Initial Build: Any weird hiccups in the build? Like inherant issues or things to just look out for? Or is it pretty straight forward? Thanks!! Does the kit come with rims? I know no tires.
Parts stash: I ordered some shock towers and was thinking to get A arms, HD Ball End Set, but anything else to "stock up" on? I know it's a stout car, but something has gotta break right?
In the 410 thread, people were recomending these (TDR330037 ....Suspension Arm Pivot Ball) for the 410r, but does the 210 need these, or do they come already with it stock?
Thanks!!
Last edited by markhat250; 11-12-2011 at 01:07 PM.
11-12-2011, 01:03 PM
#1809
wrong post
11-12-2011, 01:38 PM
#1810
Amain doesn't show A-arms, does anybody have a good online place they get Durango parts from? Thanks.
11-12-2011, 01:39 PM
#1811
Just got done Custom Making these 3D Carbon Fiber Chassis Protectors
So Far;
Only Available on the Kyosho Ultima RB5 and Ultima SC-R
Losi 22
**All new Durango DEX210**
More coming soon
They have a high tack adhesive so they will stick great to your chassis and also they look and feel like real carbon fiber. They have been tested and approved!
They will protect that brand new chassis and make your car look cool on the bottom.
$25.00 ea shipped to the lower 48 states
PM me if your interested and we can make a deal! Paypal only please!
Mainly just getting the word out for these, will have more templates soon and working on adding them to my website.
I can also do Clear Chassis Protectors for $10
Or printed chassis protectors for $25.
The Attached picture is a Kyosho RB5.. The one in the package is the DEX210
So Far;
Only Available on the Kyosho Ultima RB5 and Ultima SC-R
Losi 22
**All new Durango DEX210**
More coming soon
They have a high tack adhesive so they will stick great to your chassis and also they look and feel like real carbon fiber. They have been tested and approved!
They will protect that brand new chassis and make your car look cool on the bottom.
$25.00 ea shipped to the lower 48 states
PM me if your interested and we can make a deal! Paypal only please!
Mainly just getting the word out for these, will have more templates soon and working on adding them to my website.
I can also do Clear Chassis Protectors for $10
Or printed chassis protectors for $25.
The Attached picture is a Kyosho RB5.. The one in the package is the DEX210
11-12-2011, 06:52 PM
#1813
shock build
hi guys.. just builded up the Dex210.. need some advice..
i hv no experience with shock(caps) wo bladder..
how do i finish the shock build? do i adjust the preload i want, add oil, then cap it off(with the bled screw already in place)?
i did dat but when i worked the shock it feels like air inside..
or do i add oil with the shaft fully extended?
thanx
i hv no experience with shock(caps) wo bladder..
how do i finish the shock build? do i adjust the preload i want, add oil, then cap it off(with the bled screw already in place)?i did dat but when i worked the shock it feels like air inside..
or do i add oil with the shaft fully extended?
thanx
11-12-2011, 08:55 PM
#1815
this is +8mm finnisher body and sc10 gear diff in gear box already
it's dirty painting ^^;
i like sc10 gear diff
good driving in park
not run circuit yet
Last edited by manjagu; 11-12-2011 at 09:09 PM.
