JeremyHarris

iTrader: (1)

The vertical ball stud creates more roll center options.

Autocratic

iTrader: (26)

I'm looking to drop weight, and the chassis is the last thing I can do, so getting a longer aluminum chassis isn't going to help that.

What Raul was getting at is you run the risk of breaking ballstuds due to the different angle of stress, and not having an easy way of removing them if you break one.

vw addict

iTrader: (38)

I'm running a tight indoor carpet track, so I'm guessing I will not benefit from this. I love less hop ups to have to buy.

P6

iTrader: (5)

so i got a new motor for my truck and i have a vxl3s velineon system sitting so i threw it in the dex it seems like i could gear up alot , but now i noticed when i make a turn theirs a clicking sound sounds almost like bent driveshaft maybe? any ideas no noise going straight just turning

Jonny5

iTrader: (19)

Turning at low speed, or just in general? I would think it's cogging from a sensorless motor.

P6

iTrader: (5)

in general

P6

iTrader: (5)

i acually drove it on the floor next to me its louder when im doing a left circle

never mind , i moved to the 4m trailing and didn't move one of the washers so my front wheels are rubbing on the ball cup and the esc is coging alot because the controllers trigger is bad and i did overheat it twice so im just waiting for it to go completely ,, should have known when the front end pushes on the tile floor like the wheels arent turned

josh short

iTrader: (50)

Anybody have an idea how much the rtr buggy might cost

Garnold

iTrader: (51)

Guys what kind of foam tires can I run on this buggy? Does anyone do that? Just playing around with some ideas is all

kbish76

iTrader: (8)

Thanks guys for the help with the shorty lipos. I will look into them asap. I do have another question. I'm looking for a good base set-up as my starting point, any suggestions? Thanks again!

kbish76

iTrader: (8)

Im couldn't find the Trak Power shorty lipo on their web page...Would it be under Tower Hobbies, or somewhere else?

Tate72

iTrader: (52)

I started with the stock set-up. Only thing I did different was made the 5 hole piston a 4 hole. I used 27 1/2f and 30r shock oil.

Tate72

iTrader: (52)

Yep, Tower Hobbies carries them (:

kwiksi

iTrader: (125)

What kind of track conditions?
I have a nice low to med outdoor setup listed here.
http://www.petitrc.com/setup/durango...603/index.html

There are many other setups you can choose from for specific conditions as well here.
http://www.petitrc.com/setup/durango...ngoDEX210.html

t8rtot

iTrader: (14)

+1

the girlfriend is getting tired of just watching