Durango DEX210 Thread
#3886
Tech Fanatic
iTrader: (4)
My new shell to go with the 410 not real happy with it but it will do its job for a while. I wanted it more like the 410, Ill do more red first next time
Last edited by onekiwi; 01-26-2012 at 11:06 PM.
#3889
Tech Addict
iTrader: (23)
Will there be any of you guys running at the jconcept race in st louis next weekend? I have some parts but no hubs or wheels or spurs to run. Has anyone been able to correctly get kyosho wheels to work on the rear with the correct rear width? Ive only been able to get to page 107 in the last 3 days.
#3891
Tech Regular
iTrader: (8)
New Tresrey Bling for the DEX210:
http://www.redrc.net/2012/01/tresrey...-hop-up-parts/
Tresrey have released new hop-up parts for the Team Durango DEX210/410 expected to be released in early February. First up is the aluminium RF suspension hanger for more stiffness and durability. Changing “kick-up” angle to 3deg from 2deg which is kit standard makes the rear of the car more stable and gives you more room to set-up.
Direct replacement to the standard plastic one for more stiffness and durability. By installing this 8g heavier bulk head makes the car weight balance more forward and can be use as one of the set-up. Anodized in “Tresrey-Red”. Made in Japan.
Aluminium 14mm hex wheel hub clamp type (red/2pcs/DEX210/410)
Clamp type hex hub for more reliability and stop dropping wheel pin when you take off the wheel. Dedicated wheel pin and clamp screw included. Anodized in “Tresrey-Red”. Made in Japan.
Aluminium big bore shock preload nut (red/4pcs/DEX210/410/DESC410R)
Aluminum preload nut for more durability and the reproducibility of shock performance. O-Ring included. Anodized in “Tresrey-Red”. Made in Japan.
Steel axle shaft for Team Durango DEX210 to use with Team Associated 2WD front wheel. Direct replacement to the standard axle shaft. Made in Japan.
http://www.redrc.net/2012/01/tresrey...-hop-up-parts/
Tresrey have released new hop-up parts for the Team Durango DEX210/410 expected to be released in early February. First up is the aluminium RF suspension hanger for more stiffness and durability. Changing “kick-up” angle to 3deg from 2deg which is kit standard makes the rear of the car more stable and gives you more room to set-up.
Direct replacement to the standard plastic one for more stiffness and durability. By installing this 8g heavier bulk head makes the car weight balance more forward and can be use as one of the set-up. Anodized in “Tresrey-Red”. Made in Japan.
Aluminium 14mm hex wheel hub clamp type (red/2pcs/DEX210/410)
Clamp type hex hub for more reliability and stop dropping wheel pin when you take off the wheel. Dedicated wheel pin and clamp screw included. Anodized in “Tresrey-Red”. Made in Japan.
Aluminium big bore shock preload nut (red/4pcs/DEX210/410/DESC410R)
Aluminum preload nut for more durability and the reproducibility of shock performance. O-Ring included. Anodized in “Tresrey-Red”. Made in Japan.
Steel axle shaft for Team Durango DEX210 to use with Team Associated 2WD front wheel. Direct replacement to the standard axle shaft. Made in Japan.
#3892
#3893
#3894
Tech Elite
iTrader: (42)
Join Date: Jun 2008
Location: anywhere I can race 2wd dirt,and 1/12 onroad in MI.
Posts: 3,891
Trader Rating: 42 (100%+)
Will there be any of you guys running at the jconcept race in st louis next weekend? I have some parts but no hubs or wheels or spurs to run. Has anyone been able to correctly get kyosho wheels to work on the rear with the correct rear width? Ive only been able to get to page 107 in the last 3 days.
#3896
Tech Elite
iTrader: (42)
Join Date: Jun 2008
Location: anywhere I can race 2wd dirt,and 1/12 onroad in MI.
Posts: 3,891
Trader Rating: 42 (100%+)
first race night out with the dex210 went well. was TQ by a lap going into the main,won the main by 3 full laps on 2nd place...VERY happy with how this ride handles on the ozite!!
#3897
Any good tips on a "paint-throwing-device"? What top secret gadget is being used to contain the paint?
#3898
Chad you need to bring that thing up P.G. The new clay is sick and a couple guys got the dingo buggy up here.
#3899
Tech Elite
iTrader: (42)
Join Date: Jun 2008
Location: anywhere I can race 2wd dirt,and 1/12 onroad in MI.
Posts: 3,891
Trader Rating: 42 (100%+)
Leonard I have her set for ozite right now, and probally am not going to touch it till the weather breaks and its time to go play in dirttill then the ozite, and 40 min dive time from home is working just peachyjust not going any further than an hour from home this winter for racing man.
#3900
Thanks for the help and info everyone. I just pulled my tranny out yesterday to find what the problem I figured I was having. The c clip has worked its way out of the groove on one side and has been killing my performance. After hitting the wall at my local track like atleast 30 times yesterday the only thing to happen besides the cups coming of was I pulled the hingpin out of the rear brace. This car takes a real beating and is top notch in my eyes. I drove my rb5 on the track and had no traction at all and hen I drove the 210 again and couldnt tell the track was dry at all. Im unning the rm3 position and boy is it smooth. And fast. TQed ss buggy last week with a 17.5 with timing of course, still have stock spur. Raced it in mod also and was not really holding up all the racers. THIS CAR HANDELS.