k£v!n

I also run 2k, start from there.

lovethebuggy

Ohh i see... Thanks for the advice, I will get some 2k to try it...

Thanks!!

TAMAK

iTrader: (29)

I got a parts/ tires lot! http://www.rctech.net/forum/r-c-item...er-mounts.html

RCNYWOLFTEAM

What Are Some Good Carpet Tires For The DEX210 Or The DESC210

TAMAK

iTrader: (29)

dboots! I also like the proline wedge front for the DEX210

RCNYWOLFTEAM

Thanks

RC10Nick

iTrader: (9)

schumacher yellow mini pins work like a charm on carpet.

Walkman

iTrader: (29)

Fronts: dboots nanobytes in A compound, Schumacher low profile cut stagers in Yellow compound
Rear: Schumacher min pins in yellow compound. That's the best rear for carpet period. dboots nanobytes in A compound are good to but the min pins are the best!

lovethebuggy

Is there any durable tire out there for a basher? The rear ones that came with the car lasted less than the battery lol, they are still usable but for no too long, I play on asphalt or in a rough dirt, I guess the tires weren't too good...

Walkman

iTrader: (29)

You run any tire for a buggy on asphalt and it will not last at all they are not made for that. If your going to run on asphalt find the hardest compound you can and that still won't last to long. If your running on abrasive dirt use Jconcepts orange or another company's equivalent. As for tread that depends on the dirt, loose , hard packed? If it's loose look at something with a lot of tread depth with pins and lugs.

lovethebuggy

Would the pro line dirt hawg be a good choice?? It is very rough abrasive and loose dirt...

fredswain

iTrader: (1)

It's a good all around bashing tire.

fredswain

iTrader: (1)

Does anyone here actually have the new gear case? I'd like to know the distance between the new camber link locations as measured from each other right to left. I know what I hope they are but I want to see if it matches reality. If not I'll just make my own plate and cut off the originals.

micholix

I'll get mine on tuesday or wednesday, then i can measure it for you!

zuki250

iTrader: (3)

Hey guys...just finished rebuilding my buggy i just got...I have an 8.5 turn in it..what is a good starting point for a pinion..it has the 87t spur...i have a 25 in it now...am i in the range or do i want to go higher/lower?