R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

Like Tree27Likes
Reply
 
Thread Tools Search this Thread
Old 10-14-2012, 06:57 PM   #8221
Tech Master
 
joelwhite's Avatar
 
Join Date: May 2008
Posts: 1,853
Trader Rating: 55 (100%+)
Default

Quote:
Originally Posted by BigRon View Post
Joel, that wasn't the dango in the wall. That was the snake !! This car is very fun to drive. Can't wait to wheel it again.
Oh I know, Dango would never do ya dirty like that.
__________________
HEART OF A HUSTLER RACING TEAM

Trick Graphics--see spdrac430 on this forum for all your painting needs

Team Pit Racers-Fastest Guys In The Pits!
joelwhite is offline   Reply With Quote
Old 10-14-2012, 07:19 PM   #8222
Tech Regular
 
Join Date: Feb 2005
Location: iowa
Posts: 470
Trader Rating: 6 (100%+)
Default

What is the differance between the mos big bore and the stock ?im guessing they are coated with teflon or something simular ?
__________________
Mike Richardson
At the track having fun with my friends
blingy is offline   Reply With Quote
Old 10-14-2012, 07:23 PM   #8223
Tech Champion
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Minnesota
Posts: 7,377
Trader Rating: 520 (100%+)
Default

Quote:
Originally Posted by blingy View Post
What is the differance between the mos big bore and the stock ?im guessing they are coated with teflon or something simular ?
That's whats noticeable to the naked eye, but looking into them a little, they have different shafts, and bushings that would lead me to believe a little tighter tolerances--just a stab in the dark..
flame56mx is offline   Reply With Quote
Old 10-14-2012, 09:30 PM   #8224
Tech Regular
 
mugenmike72's Avatar
 
Join Date: Dec 2005
Location: Townsville
Posts: 377
Trader Rating: 15 (100%+)
Default DEX210.

Hey Guys,
just wondering has anyone had their rear hubs and turn buckle rub on the rear rims??
Is there a problem with the kit rims???
mugenmike72 is offline   Reply With Quote
Old 10-14-2012, 09:44 PM   #8225
Tech Champion
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Minnesota
Posts: 7,377
Trader Rating: 520 (100%+)
Default

Quote:
Originally Posted by mugenmike72 View Post
Hey Guys,
just wondering has anyone had their rear hubs and turn buckle rub on the rear rims??
Is there a problem with the kit rims???
No problem with the rims, they do have some flex in them. The clearance is tight, I rounded off the top corners of my hubs a bit..
flame56mx is offline   Reply With Quote
Old 10-15-2012, 12:40 PM   #8226
Tech Addict
 
Join Date: Dec 2005
Location: HB, CA
Posts: 715
Trader Rating: 31 (100%+)
Default

Quote:
Originally Posted by jonski View Post
Can someone explain to me how to correct this? Or what I did wrong building it? It does it both ways.

http://i6.photobucket.com/albums/y23...-34-15_135.mp4
Mine does the same thing. Seems to be inheirant to this car. It seems like if you play with the bump steer shims it tightens it up a little but have never been able to completely eliminate it.
__________________
MBX6-ECO, B5m
Cspurlock is offline   Reply With Quote
Old 10-15-2012, 01:44 PM   #8227
Tech Fanatic
 
discgolferlee's Avatar
 
Join Date: Jan 2010
Location: Adrian, Michigan
Posts: 952
Trader Rating: 42 (100%+)
Default

Quote:
Originally Posted by mugenmike72 View Post
Hey Guys,
just wondering has anyone had their rear hubs and turn buckle rub on the rear rims??
Is there a problem with the kit rims???
check to make sure you don't have the hubs backwards. the portion that the links hook to is not in the center of the hub and needs to go a specific way.
hope I didn't confuse you.

pic for reference
discgolferlee is offline   Reply With Quote
Old 10-15-2012, 03:47 PM   #8228
Tech Elite
 
paintchip31's Avatar
R/C Tech Elite Subscriber
 
Join Date: Jun 2009
Location: Ohio
Posts: 3,836
Trader Rating: 434 (100%+)
Send a message via ICQ to paintchip31
Default

Quote:
Originally Posted by BigRon View Post
Joel, that wasn't the dango in the wall. That was the snake !! This car is very fun to drive. Can't wait to wheel it again.
I have no clue really what ever you find is cool as long as it is CF but that did come off Joel's old buggy he should know.
__________________
Heart of a hustler racing
TRICK GRAPHICS
The Loft RC Raceway ~ Columbus, OH ~ www.TheLoftRC.net
sponsored by
http://teameamotorsports.com/
paintchip31 is offline   Reply With Quote
Old 10-15-2012, 05:36 PM   #8229
Tech Elite
 
Join Date: May 2010
Posts: 3,844
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by blingy View Post
What is the differance between the mos big bore and the stock ?im guessing they are coated with teflon or something simular ?
The bodies are coated with an MOS coating, similar to the Kyosho Velvets. Also, the shafts are 3mm as opposed to the TD which are 3.25mm. This makes them smoother and less sensitive to swelling orings (something that is unavoidable).
__________________
XRAY, RC America, MOTIV, Sanwa, Arrowmax, Neverlift Racing Apparel
Jonny5ive Designs- by racers, for racers!
Jonny5 is offline   Reply With Quote
Old 10-15-2012, 06:05 PM   #8230
Tech Champion
 
morris's Avatar
 
Join Date: Nov 2005
Location: jersey shore pa
Posts: 5,564
Trader Rating: 40 (100%+)
Default

this question is for the guys that did the 12mm hex mod to Tue front.i ordered all the parts that were needed per the part numbers that was posted in the thread.after i got everything on my front rim is hitting the screw on the arm that holds the hinge pin from falling out.im using the new aka rims.which the offset should be the same.has anyone else had issues with the front rim rubbing on the arm causing it to bind up?
__________________
AE/VIPER/XPERT/DIRTCHEAPRC.COM/JCONCEPTS
A big thx to all the tracks that I race at:cause if it wasnt for these guys..we wouldnt have a place to race our r/c cars!!!
morris is offline   Reply With Quote
Old 10-15-2012, 06:07 PM   #8231
P6
Tech Addict
 
Join Date: May 2012
Location: il
Posts: 683
Trader Rating: 5 (100%+)
Default

what cts or wt oil are you gear diff guys using for high bite clay ,i have an ae diff with shims laying around and i just orderd new diff balls im not to confident in how smooth my last build was so im gonna try both diffs
P6 is offline   Reply With Quote
Old 10-15-2012, 06:21 PM   #8232
Tech Master
 
RC10Nick's Avatar
 
Join Date: Oct 2010
Posts: 1,299
Trader Rating: 7 (100%+)
Default

I just picked up one of these to run for the indoor season. How many guys are running and liking the mid motor setup?
RC10Nick is offline   Reply With Quote
Old 10-15-2012, 06:49 PM   #8233
Tech Master
 
TAMAK's Avatar
 
Join Date: Nov 2008
Posts: 1,950
Trader Rating: 28 (100%+)
Default

Thought I would share some photos of my 210 all freshened up for Spektrum. JConcepts ball cup, B4 Ti turnbuckle kit, and TC5 TiNi coated ball studs. Smooth and tight! I was inspired by the Jconcepts Dex210 finnisher body video...

Durango DEX210 Thread-img_0622-1280x960-.jpg

Durango DEX210 Thread-img_0623-960x1280-.jpg
__________________
TrakPower Speed Equipment / Speed Passion
Serpent Natrix 748 TQ - Nova REX
D413 Reventon 1.1ex 13.5t; AE B6d Laydown Reventon Pro 1.1
DNX408V2-NovaP5, DETC410-Reventon 1.1ex-5.5t MMM
RC10 , RC10GT2- CV-R- SAVOX,
TAMAK is offline   Reply With Quote
Old 10-15-2012, 06:54 PM   #8234
Tech Elite
 
Join Date: May 2010
Posts: 3,844
Trader Rating: 19 (100%+)
Default

Quote:
Originally Posted by TAMAK View Post
Thought I would share some photos of my 210 all freshened up for Spektrum. JConcepts ball cup, B4 Ti turnbuckle kit, and TC5 TiNi coated ball studs. Smooth and tight! I was inspired by the Jconcepts Dex210 finnisher body video...

Attachment 981876

Attachment 981877
Need to do something about that blue man! I really dig the white ballcups though- ran them on my sc10 for a long time.
__________________
XRAY, RC America, MOTIV, Sanwa, Arrowmax, Neverlift Racing Apparel
Jonny5ive Designs- by racers, for racers!
Jonny5 is offline   Reply With Quote
Old 10-15-2012, 06:56 PM   #8235
Tech Master
 
TAMAK's Avatar
 
Join Date: Nov 2008
Posts: 1,950
Trader Rating: 28 (100%+)
Default

Quote:
Originally Posted by Jonny5 View Post
Need to do something about that blue man! I really dig the white ballcups though- ran them on my sc10 for a long time.
I need to find someone willing to anodize them gold.. But My paint scheme will match the blue also.
__________________
TrakPower Speed Equipment / Speed Passion
Serpent Natrix 748 TQ - Nova REX
D413 Reventon 1.1ex 13.5t; AE B6d Laydown Reventon Pro 1.1
DNX408V2-NovaP5, DETC410-Reventon 1.1ex-5.5t MMM
RC10 , RC10GT2- CV-R- SAVOX,
TAMAK is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
St Ives RC Club B4Bandit Australian Racing 16572 10-14-2017 01:35 AM
EPMTs check in here. (a subsidiary of TNT) overtki11 Singapore R/C Racers 55470 05-07-2017 11:57 PM
Team Durango DEX410 ASH93A Australian Racing 925 04-08-2013 09:51 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:22 PM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net