R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

Like Tree17Likes
Reply
 
Thread Tools Search this Thread
Old 12-09-2011, 04:44 PM   #2596
Tech Elite
 
Join Date: Feb 2009
Location: Fort Wayne, IN
Posts: 2,460
Trader Rating: 109 (100%+)
Send a message via AIM to kwiksi
Default

Quote:
Originally Posted by tom235 View Post
I did put about 1/2 behind the servo because I a
am running a low profile servo and that did help a little
should I move it to under the bulkhead?
I am going to play with springs and oil and see what
happens
Try it out. You have nothing to lose. I have 3-1/4 oz. squares that fit perfect. 2 in the bulkhead and 1 under the pivot block.
kwiksi is offline   Reply With Quote
Old 12-09-2011, 06:36 PM   #2597
Tech Regular
 
tom235's Avatar
 
Join Date: Aug 2004
Location: ut
Posts: 327
Default

Quote:
Originally Posted by kwiksi View Post
Try it out. You have nothing to lose. I have 3-1/4 oz. squares that fit perfect. 2 in the bulkhead and 1 under the pivot block.
i will give it a go and see how it works thanks
tom235 is offline   Reply With Quote
Old 12-09-2011, 07:22 PM   #2598
Tech Master
 
Yeti AS3's Avatar
 
Join Date: Jan 2010
Location: lockport,IL
Posts: 1,347
Trader Rating: 77 (100%+)
Default

I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.

Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
Attached Thumbnails
Durango DEX210 Thread-parts-large-.jpg  
__________________
Hot Bodies D413
AE B5m

Haigh Designz -Custom Airbrushing
Leisure Hours Hobby and Raceway!!

Last edited by Yeti AS3; 12-09-2011 at 07:34 PM.
Yeti AS3 is offline   Reply With Quote
Old 12-09-2011, 07:28 PM   #2599
Tech Master
 
hopsing's Avatar
 
Join Date: Sep 2010
Location: Temecula, CA
Posts: 1,169
Trader Rating: 13 (93%+)
Default

http://www.rccaraction.com/blog/2011...lectric-buggy/
__________________
Steve Butts
AKA, TrakPower, Serpent America/Desoto Racing, TrackStar, Futaba, EKD Paints
hopsing is offline   Reply With Quote
Old 12-09-2011, 07:52 PM   #2600
Tech Champion
 
Briguy's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2006
Location: Ottawa , IL
Posts: 8,128
Trader Rating: 125 (100%+)
Send a message via Yahoo to Briguy
Default

Quote:
Originally Posted by Yeti AS3 View Post
I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.

Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
Curt , you can count me in for one of you do make them .
__________________
At Your Service Vinyl Works
Royal R/C & Hobby
Leisure Hours Hobby & Raceway
Briguy is offline   Reply With Quote
Old 12-09-2011, 08:05 PM   #2601
Super Moderator
 
Cpt.America's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2009
Location: Washington State
Posts: 11,083
Trader Rating: 52 (100%+)
Default

Quote:
Originally Posted by Briguy View Post
Curt , you can count me in for one of you do make them .
x2
__________________
A big thanks to my sponsors:
- Fantom Racing - www.fantomracing.com -
- Fusion Graphix- www.fusiongraphix.com -
- RCSpecialties -
Cpt.America is offline   Reply With Quote
Old 12-09-2011, 08:44 PM   #2602
Tech Elite
 
Join Date: Feb 2009
Location: Fort Wayne, IN
Posts: 2,460
Trader Rating: 109 (100%+)
Send a message via AIM to kwiksi
Default

Quote:
Originally Posted by Yeti AS3 View Post
I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.

Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
I'd take one.
kwiksi is offline   Reply With Quote
Old 12-09-2011, 08:53 PM   #2603
Tech Regular
 
Join Date: Mar 2003
Location: Newbury Park, CA
Posts: 334
Trader Rating: 29 (100%+)
Default

Quote:
Originally Posted by Yeti AS3 View Post
I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.

Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
x4
Yzlvr is offline   Reply With Quote
Old 12-09-2011, 09:51 PM   #2604
Tech Champion
R/C Tech Elite Subscriber
 
Join Date: Oct 2008
Location: Minnesota
Posts: 7,375
Trader Rating: 519 (100%+)
Default

Quote:
Originally Posted by Yeti AS3 View Post
I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.

Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
X5, depending on how costly, perhaps a pair..
flame56mx is offline   Reply With Quote
Old 12-09-2011, 10:12 PM   #2605
Tech Adept
 
Slash'em1's Avatar
 
Join Date: Jun 2010
Location: Pecatonica, IL
Posts: 226
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Yeti AS3 View Post
I had a request from a guy at the track to make the rear hinge pin block out of aluminum. I will be making the 3/3 block. If the demand is there, I may conside making 10+ or so to sell. It will be CNC made from 1075/T651 alum. I usually just make 1 off stuff for myself and guys at the track.

Here's a few things I made so you know they won't be junk. Left to right..DESC410 front hinge pin blick with 2.5mm extra stock added to the front, brass side weights, TLR22 front camber block I made a week after the release of the buggy.
X6 I'd be interested also.
Slash'em1 is offline   Reply With Quote
Old 12-09-2011, 10:17 PM   #2606
Tech Master
 
joelwhite's Avatar
 
Join Date: May 2008
Posts: 1,853
Trader Rating: 55 (100%+)
Default

x7 lol love to have one
__________________
HEART OF A HUSTLER RACING TEAM

Trick Graphics--see spdrac430 on this forum for all your painting needs

Team Pit Racers-Fastest Guys In The Pits!
joelwhite is offline   Reply With Quote
Old 12-09-2011, 11:46 PM   #2607
Super Moderator
 
Cpt.America's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2009
Location: Washington State
Posts: 11,083
Trader Rating: 52 (100%+)
Default

New finisher threads and black kicks for the 210...

__________________
A big thanks to my sponsors:
- Fantom Racing - www.fantomracing.com -
- Fusion Graphix- www.fusiongraphix.com -
- RCSpecialties -
Cpt.America is offline   Reply With Quote
Old 12-10-2011, 01:45 AM   #2608
Tech Master
 
murky123's Avatar
 
Join Date: Apr 2010
Location: netherlands
Posts: 1,031
Default

Quote:
Originally Posted by hopsing View Post
lol.. the first thing I read in the review.

The instruction manual is clear and concise as any of the best Iíve ever seen. Super easy to follow and 100% small parts blow up so you can hold the screw/washer up to the manual to make sure itís the right one.

guess that at rccaraction the overlooked the wrong partnumbers etc. etc. in the manual.

the manual that came with the kit is one of the worst Ive seen

for a proper build use the online version
__________________
AE SC10 4x4, Durango DEX210 + DESC210R, HB D413
www.rcracing.nl www.mvb.nl
murky123 is offline   Reply With Quote
Old 12-10-2011, 04:58 AM   #2609
Tech Master
 
Yeti AS3's Avatar
 
Join Date: Jan 2010
Location: lockport,IL
Posts: 1,347
Trader Rating: 77 (100%+)
Default

Well, it looks like I will make a run of the rear hinge pin block
I will try and get some done during the week. I'll keep everybody posted. Thanks.
__________________
Hot Bodies D413
AE B5m

Haigh Designz -Custom Airbrushing
Leisure Hours Hobby and Raceway!!
Yeti AS3 is offline   Reply With Quote
Old 12-10-2011, 05:02 AM   #2610
Tech Champion
 
Briguy's Avatar
R/C Tech Elite Subscriber
 
Join Date: Aug 2006
Location: Ottawa , IL
Posts: 8,128
Trader Rating: 125 (100%+)
Send a message via Yahoo to Briguy
Default

Sweet !
__________________
At Your Service Vinyl Works
Royal R/C & Hobby
Leisure Hours Hobby & Raceway
Briguy is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
St Ives RC Club B4Bandit Australian Racing 16561 Today 03:54 AM
EPMTs check in here. (a subsidiary of TNT) overtki11 Singapore R/C Racers 55470 05-07-2017 11:57 PM
Team Durango DEX410 ASH93A Australian Racing 925 04-08-2013 09:51 PM



Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
coaltrain
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 10:58 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net