R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Electric Off-Road

Like Tree23Likes
Reply
 
Thread Tools Search this Thread
Old 11-18-2011, 02:21 PM   #2086
Super Moderator
 
Cpt.America's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2009
Location: Washington State
Posts: 11,083
Trader Rating: 52 (100%+)
Default

Quote:
Originally Posted by Rdog View Post
Just finished the initial assembly of my kit, gotta paint the body and install the electroics. Where are you guys at for a 17.5 motor for gearing. I only have the stock spur for now. I plan on ordering the RW spurs soon. Thanks in advance guys.
You can't run 17.5 blinky class with the stock spur gear (87)... you can only fit a 25 pinion, which is still undergeared even for a 9.5. Go onto amainhobbies or ebay and look up the RW spur gears for the 210... they make 81s, and 75s. Grab an 81 if you are going to run mod, and grab a 75 if you are going to run 17.5

Depending on your motor and endbell timing, I would start around 75/30-31 for 17.5 blinky.
__________________
A big thanks to my sponsors:
- Fantom Racing - www.fantomracing.com -
- Fusion Graphix- www.fusiongraphix.com -
- RCSpecialties -
Cpt.America is offline   Reply With Quote
Old 11-18-2011, 04:09 PM   #2087
Tech Adept
 
Slash'em1's Avatar
 
Join Date: Jun 2010
Location: Pecatonica, IL
Posts: 226
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Jonny5 View Post
32-33. Not sure it will fit- Cush runs an 8.5 so the only gears we have run are an 81 and the stock 87.
30 won't even fit with the 75 tooth spur. I was able to ream out a AE 72 tooth spur and a 30 to at least 33 will fit, but will that be over geared?
Slash'em1 is offline   Reply With Quote
Old 11-18-2011, 04:12 PM   #2088
Super Moderator
 
Cpt.America's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2009
Location: Washington State
Posts: 11,083
Trader Rating: 52 (100%+)
Default

Quote:
Originally Posted by Slash'em1 View Post
30 won't even fit with the 75 tooth spur. I was able to ream out a AE 72 tooth spur and a 30 to at least 33 will fit, but will that be over geared?
That's not true... i put a 30 tooth pinion with the RW 81 spur last night and it fit fine.
__________________
A big thanks to my sponsors:
- Fantom Racing - www.fantomracing.com -
- Fusion Graphix- www.fusiongraphix.com -
- RCSpecialties -
Cpt.America is offline   Reply With Quote
Old 11-18-2011, 04:17 PM   #2089
Tech Adept
 
Slash'em1's Avatar
 
Join Date: Jun 2010
Location: Pecatonica, IL
Posts: 226
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Cpt.America View Post
That's not true... i put a 30 tooth pinion with the RW 81 spur last night and it fit fine.
Hmmmmm I don't why it didn't fit on my car???? I was using a AE 75 tooth but I don't see why that would make a difference.
Slash'em1 is offline   Reply With Quote
Old 11-18-2011, 04:24 PM   #2090
Super Moderator
 
Cpt.America's Avatar
R/C Tech Elite Subscriber
 
Join Date: Mar 2009
Location: Washington State
Posts: 11,083
Trader Rating: 52 (100%+)
Default

Quote:
Originally Posted by Slash'em1 View Post
Hmmmmm I don't why it didn't fit on my car???? I was using a AE 75 tooth but I don't see why that would make a difference.
pic to prove.
Attached Thumbnails
Durango DEX210 Thread-8130.jpg  
__________________
A big thanks to my sponsors:
- Fantom Racing - www.fantomracing.com -
- Fusion Graphix- www.fusiongraphix.com -
- RCSpecialties -
Cpt.America is offline   Reply With Quote
Old 11-18-2011, 04:29 PM   #2091
Tech Regular
 
elikeatts's Avatar
 
Join Date: Jan 2011
Posts: 462
Trader Rating: 1 (100%+)
Default

This car is cool. But I got a 22 or I would get one.
elikeatts is offline   Reply With Quote
Old 11-18-2011, 04:31 PM   #2092
Tech Adept
 
Slash'em1's Avatar
 
Join Date: Jun 2010
Location: Pecatonica, IL
Posts: 226
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Cpt.America View Post
pic to prove.
Dude I'm not doubting you. I will try it again. Maybe my motor got stuck and I thought it was all the back.
Slash'em1 is offline   Reply With Quote
Old 11-18-2011, 05:07 PM   #2093
Tech Adept
 
Slash'em1's Avatar
 
Join Date: Jun 2010
Location: Pecatonica, IL
Posts: 226
Trader Rating: 3 (100%+)
Default

Quote:
Originally Posted by Slash'em1 View Post
Hmmmmm I don't why it didn't fit on my car???? I was using a AE 75 tooth but I don't see why that would make a difference.
Ok, I take it back, It does fit! It's just been one of those days!
Slash'em1 is offline   Reply With Quote
Old 11-18-2011, 05:16 PM   #2094
Tech Fanatic
 
rcman182006's Avatar
 
Join Date: May 2006
Location: Pleasantville, OH
Posts: 779
Trader Rating: 13 (100%+)
Send a message via Yahoo to rcman182006
Default

Does anyone know if the stock slipper pad work on the AE spurs?
__________________
-=-Charles Kilbarger-=-
Serpent SRX2 MM - D4 17.5 - Hobbywing Justock
AE RC10 Team Car - RevTech 17.5 - Hobbywing Justock
#NoChuck2015
rcman182006 is offline   Reply With Quote
Old 11-18-2011, 05:19 PM   #2095
Tech Adept
 
Slash'em1's Avatar
 
Join Date: Jun 2010
Location: Pecatonica, IL
Posts: 226
Trader Rating: 3 (100%+)
Default

Don't ask me I have already been wrong once tonight.
Slash'em1 is offline   Reply With Quote
Old 11-18-2011, 06:14 PM   #2096
Tech Elite
 
1armed1's Avatar
 
Join Date: Apr 2005
Location: Northern Indiana
Posts: 3,074
Trader Rating: 79 (100%+)
Send a message via AIM to 1armed1
Default

Quote:
Originally Posted by rcman182006 View Post
Does anyone know if the stock slipper pad work on the AE spurs?
Yes they do.

They are just a tick smaller then the Ae pads but they work perfectly fine with the ae gear.

Dayton
__________________
Serpent,Sanwa,Fantom Racing
92zero.com,Lunsford Racing,AKA Racing
TXD Snake Skin Graphix
1armed1 is offline   Reply With Quote
Old 11-18-2011, 11:46 PM   #2097
Tech Regular
 
jannedwr's Avatar
 
Join Date: Nov 2011
Location: Sweden
Posts: 310
Default

But why run a 17,5 motor?
I ordered a tekin 7,5 and hope it will be fine!?
__________________
Mugen MBX7R ECO *Mugen MBX7R *X-Ray X12 2016 *X-rayM18Pro *Tekin*Sanwa Super Zero*Sanwa M12
Our tracks in Uppsala, Sweden
http://storvretarc.blogspot.com/
http://rorkenrc.blogspot.com/
jannedwr is offline   Reply With Quote
Old 11-18-2011, 11:53 PM   #2098
Tech Adept
 
Huleboer's Avatar
 
Join Date: Feb 2011
Location: Horsens, Denmark
Posts: 210
Default

I'm sorry for beating an dying horse, but when I throttle my car i can hear it slipping.
I'm not sure wether it's the slipper or the thrust drive that gives.
How tight am i supposed to have the thrust? I've loosened it up a bit because it didn't feel "smooth" in my hand when I build it. Now it feels smooth but it might be too loose.
__________________
Team Associated RC8b3e w/ Hobbywing Xerun 150A 1800KV and Gens Ace 6750mAh 70c
Huleboer is offline   Reply With Quote
Old 11-19-2011, 01:53 AM   #2099
Tech Master
 
goBezerk's Avatar
 
Join Date: Mar 2009
Location: KRCORCC, VIC, AUS
Posts: 1,637
Trader Rating: 10 (100%+)
Send a message via Skype™ to goBezerk
Default

Take off gear cover. Hold rear wheels from rotating. Use finger/thumb to rotate spur gear. If the nut for tensioning of the slipper rotates with the spur, your diff is slipping. If the nut stays stationery, the slipper is doing its job...
__________________
► Paul Sims - KRCORCC - BRCCC - TFTR
► R/C racin', 1 percent car, 99 percent driver
► BEZERK RC on Facebook, PayPal accepted
► PROLINE - TEAM AE - GFORCE - R/C Race Supplies
goBezerk is offline   Reply With Quote
Old 11-19-2011, 02:33 AM   #2100
Tech Initiate
 
offroad_home's Avatar
 
Join Date: Jun 2010
Posts: 35
Default

I got a problem with my ball diff.

Antime I maintain -2 degrees camber the suspension on the side with the T-Nut binds, because the CVD and the T-Nut touch themselves.

Turning the diff in the gearbox didn't help.
Diff is 2,5 turns from tight and the hole car is new.

Any advice?
__________________
Bazinga! - Sheldon Cooper
Team Terribles - teamterribles.com

also known as "Frank L Jr."
offroad_home is offline   Reply With Quote
Reply

Similar Threads
Thread Thread Starter Forum Replies Last Post
St Ives RC Club B4Bandit Australian Racing 16562 Yesterday 05:07 AM
EPMTs check in here. (a subsidiary of TNT) overtki11 Singapore R/C Racers 55470 05-07-2017 11:57 PM
Team Durango DEX410 ASH93A Australian Racing 925 04-08-2013 09:51 PM



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 12:17 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net