Durango DEX210 Thread
Tech Addict
Wow congrats, nice catch!
Let us know, how you like it?
Let us know, how you like it?
Tech Addict
Tech Master
iTrader: (8)
That same guy sold one a few weeks ago for $25. I forgot to bid on it. Still kicking myself...
Tech Master
iTrader: (8)
Oh, i forgot some things!
V1 had 31 mm rear shock bodys and 55 mm shock shafts, the v2 and v3 had same body, but 52 mm shafts!
Also the v2 and v3 got the new rear a-arms, where you have the possibility to mount the shocks at the front and the rear of the arms and a fiew other updated composit parts, like the waterfall gear brace and some smaler parts, these are all named as type B parts!
If you use the type B gear box, you will need also the type B braces, or you have to modify them to fit.
Here is a nice Team Durango Parts Cross Reference Table:
http://www.team-durango.com/pdf/xref...s-xref-usa.pdf
V1 had 31 mm rear shock bodys and 55 mm shock shafts, the v2 and v3 had same body, but 52 mm shafts!
Also the v2 and v3 got the new rear a-arms, where you have the possibility to mount the shocks at the front and the rear of the arms and a fiew other updated composit parts, like the waterfall gear brace and some smaler parts, these are all named as type B parts!
If you use the type B gear box, you will need also the type B braces, or you have to modify them to fit.
Here is a nice Team Durango Parts Cross Reference Table:
http://www.team-durango.com/pdf/xref...s-xref-usa.pdf
Tech Addict
Lol, I saved that listing. Didn't know it was a smoking deal! I noticed a bunch of +8 and +10 carbon fiber chassis plus the +8 DIMEC and DIMECC plastic listed as well. No shortage of options that's for sure.
Correction:
Gull wing arms= V1
Flat Aero arms= V2
Flat Aero arms= V3
Flat Aero arms= F
Correction:
Gull wing arms= V1
Flat Aero arms= V2
Flat Aero arms= V3
Flat Aero arms= F
Last edited by Alan_r; 01-09-2017 at 06:47 AM.
Tech Addict
In my understanding and according to the V3 manual: The V3 uses flat arms as well. Only the V1 had gull wings. But the gull wings worked great on my sons V2.
Tech Master
iTrader: (8)
Yep. V3 had the flat arms.
Tech Addict
Fred, did you get a chance to compare the b44 shock tower.
Alan. Sounds like you have a big collection of RC cars. Is there a shock tower that is close in dimensions to the dex210 that would give us 2-4 mm higher attachment points.
Or anybody for they matter. Or is their someone on his thread that could make us a custom carbon one. Or 3D print a spacer to fit between the bullkeads to raise the upper bulkhead up 2-3 mm.
Thanks for checking.
Alan. Sounds like you have a big collection of RC cars. Is there a shock tower that is close in dimensions to the dex210 that would give us 2-4 mm higher attachment points.
Or anybody for they matter. Or is their someone on his thread that could make us a custom carbon one. Or 3D print a spacer to fit between the bullkeads to raise the upper bulkhead up 2-3 mm.
Thanks for checking.
Fred, did you get a chance to compare the b44 shock tower.
Alan. Sounds like you have a big collection of RC cars. Is there a shock tower that is close in dimensions to the dex210 that would give us 2-4 mm higher attachment points.
Or anybody for they matter. Or is their someone on his thread that could make us a custom carbon one. Or 3D print a spacer to fit between the bullkeads to raise the upper bulkhead up 2-3 mm.
Thanks for checking.
Alan. Sounds like you have a big collection of RC cars. Is there a shock tower that is close in dimensions to the dex210 that would give us 2-4 mm higher attachment points.
Or anybody for they matter. Or is their someone on his thread that could make us a custom carbon one. Or 3D print a spacer to fit between the bullkeads to raise the upper bulkhead up 2-3 mm.
Thanks for checking.
Tech Addict
Hi Fred, could you please tell me, what width the exotek chassis does have?
I just would be interrested, if the dex210f body will fit, instead of the mentioned losi body!?
I just would be interrested, if the dex210f body will fit, instead of the mentioned losi body!?
Tech Addict
Tech Addict
Fred, did you get a chance to compare the b44 shock tower.
Alan. Sounds like you have a big collection of RC cars. Is there a shock tower that is close in dimensions to the dex210 that would give us 2-4 mm higher attachment points.
Or anybody for they matter. Or is their someone on his thread that could make us a custom carbon one. Or 3D print a spacer to fit between the bullkeads to raise the upper bulkhead up 2-3 mm.
Thanks for checking.
Alan. Sounds like you have a big collection of RC cars. Is there a shock tower that is close in dimensions to the dex210 that would give us 2-4 mm higher attachment points.
Or anybody for they matter. Or is their someone on his thread that could make us a custom carbon one. Or 3D print a spacer to fit between the bullkeads to raise the upper bulkhead up 2-3 mm.
Thanks for checking.
Currently sitting at 47 models with wheels. I get things mixed up sometimes. I have to go through and look/measure some front towers. It's 30° in my garage right now so it won't be today. Damn winter, only lasts a month or two here but anything below 50 might as well be Antarctica to me.
Tech Legend
iTrader: (294)
Tech Master
iTrader: (11)
Im using a jconcepts b5m silencer body and like how it fits, the space that is open is what im using for velcro attachment points so i dont have to smash the body to make it look out of shape on the chassis.
Tech Addict
Good info Joe!!
Quick question.
What Velcro do most of you use?
Thanks
Quick question.
What Velcro do most of you use?
Thanks