BRUSHLESS SYSTEM FOR STOCK SLASH
#2
Tech Master
iTrader: (70)
Mamba 4600 system. Plenty fast on 6-cells. A screamer on 7-cells but still somewhat controllable.
Runtime will all depend on the capacity of the batteries. Get some decent 4600mah and you should see runtimes around 20-30 minutes I'd imagine. I got around 20-25 with my 4000mah lipo and stock gearing.
Runtime will all depend on the capacity of the batteries. Get some decent 4600mah and you should see runtimes around 20-30 minutes I'd imagine. I got around 20-25 with my 4000mah lipo and stock gearing.
#4
Novak havoc would be a cost effective set up in a slash.
#5
#6
Mamba 4600 system. Plenty fast on 6-cells. A screamer on 7-cells but still somewhat controllable.
Runtime will all depend on the capacity of the batteries. Get some decent 4600mah and you should see runtimes around 20-30 minutes I'd imagine. I got around 20-25 with my 4000mah lipo and stock gearing.
Runtime will all depend on the capacity of the batteries. Get some decent 4600mah and you should see runtimes around 20-30 minutes I'd imagine. I got around 20-25 with my 4000mah lipo and stock gearing.
but 4600 would be better for a non racing slash
nce71, a mamba system costs the same as the novak system that you speak of and it is also less powerful than the mamba although Novak is the O.S. of electric motors. A 5700kv would have a longer run time than your 4600kv.
#7
Tech Master
iTrader: (1)
why its controllable with 3S lipo on a 5700kv Mamba
but 4600 would be better for a non racing slash
nce71, a mamba system costs the same as the novak system that you speak of and it is also less powerful than the mamba although Novak is the O.S. of electric motors. A 5700kv would have a longer run time than your 4600kv.
but 4600 would be better for a non racing slash
nce71, a mamba system costs the same as the novak system that you speak of and it is also less powerful than the mamba although Novak is the O.S. of electric motors. A 5700kv would have a longer run time than your 4600kv.
#8
??
No mention of the Velineon VXL?? as far as a brushless setup for bashing I think it takes the cake as far as cost, power and reliability. Just my $.02
#9
#11
#12
#14
#15
Tech Master
iTrader: (5)
if you are just out for bashing you wont need anything more than a vxl. This is a very simple brushless system to set up and can propel your slash on a 3-cell lipo to over 60+mph. Mamba motors are more for racing because of such great programmability and tuning.
Bashing--vxl
Racing--Mamba 4600
Bashing--vxl
Racing--Mamba 4600