Suggest Lipo for Kyosho ZX5 FS Saddle pack
#1
Suggest Lipo for Kyosho ZX5 FS Saddle pack
Can anyone suggest a 2 cell, 25C + saddle pack lipo for a Kyosho ZX5-FS.
Thanks in advance
Thanks in advance
#2
Tech Adept
I am using an SMC 28c 4900Mah pack with good results. It needs the battery hold downs raised about 3mm and the body will need to be cut lower to allow room for the crossover wire.
#3
The new IP4200 30c saddles by Intellect are a perfect fit and a really good price.
#4
#5
#6
Tech Elite
iTrader: (13)
Not trying to be a smart ass but do you really need a 5000+ mAH packs for these kinds of vehicles? I would think your ESC and Motor would be on the verge of thermalling if you put in such high capacity packs...
I still run a 3300mAH NiMH in my B44 and I still get good performance beyond six minutes...
I still run a 3300mAH NiMH in my B44 and I still get good performance beyond six minutes...
#7
Not trying to be a smart ass but do you really need a 5000+ mAH packs for these kinds of vehicles? I would think your ESC and Motor would be on the verge of thermalling if you put in such high capacity packs...
I still run a 3300mAH NiMH in my B44 and I still get good performance beyond six minutes...
I still run a 3300mAH NiMH in my B44 and I still get good performance beyond six minutes...
#8
Thanks guys,
Just like everyone I was looking for the best fit in the chassis. Now I've got a SP to FS conversion kit on the way, and wanted to have the lipo ready to go.
Thanks Again.
Just like everyone I was looking for the best fit in the chassis. Now I've got a SP to FS conversion kit on the way, and wanted to have the lipo ready to go.
Thanks Again.
#9
What is the reason behind limiting Lipo capacity to 5400mah? What made them stumble upon that magic number?
#10
Tech Adept
for tebo's or ronnie garner's car do they run nimh because orion doesn't make saddle packs or is it for some other reason? are lipo saddle packs wired 2s3p for a total of 6 cells