Traxxas e-revo setup
 

what setup should i use on my e? i'm running on Novak 5.5HV and maxamps 11.1v 5200 or something. stock everything else besides single motor convesion set and wheely bar (of course)

anyone?

We're in the same boat. I'm also in the process of converting mine to BL. I'll be using :

1) Medusa 36-70-1600KV motor
2) Castle Creations MMM
3) 2 X 3S 4900mah Rhino Lipo (in series for 6S)
4) 21 pinion (RCM) with 65 spur (Traxxas)

Other mods or upgrades will include :

1) LPR crime fighters all round with 17mm hex adaptors
2) Sway bar kit from Tekno
3) Single servo (ACE 1015) with proline servo thingy & Traxxas servo saver spring
4) Harder shock springs all round (using the LT springs at the moment)
5) Cover for single motor

The E-REVO is pretty heavy. Chassis without batteries or wheels or body weighs around 3100g. Wheels & tires are about 200g each. Battery is around 400g each. At this rate, a fully loaded truck will weigh in excess of 4.7kg +-100g

Other maybe / want to haves may include :

1) center diff
2) hybrid diff using buggy diff from RCM
3) titanium rods all round (prohibitive $)

So I guess what I want to know is :

1) What is the shock oils weight f/r
2) What shock springs f/r
3) What diff fluid f/r

Regards,
Joe Ling

http://i198.photobucket.com/albums/a...g39/revo01.jpg

for diffs i use 50w front and 10w rear. I will try to get you the rest of the setup soon.