Academy SBV1 Build
I have a few questions that I'm hoping can get answered. I got a great deal on a sbv1 & I've been doing all the mods to get it up to spec. So far I have done the following, rough up motor mount, dremeled & caed chassis, bb steering, shimmed the bearings on the hubs, alum. arm carriers, added a post in the middle of the chassis, ceramic diff balls, steel out drives, added bumper in rear to preserve under plate, added one way, and added body mount posts. Now, here is what I need.
How to shim the steering to remove bump steer, a good setup w/ stock springs for a small tight 1/10th track, and any other advice on setting up the car.