Slash Body Protection
#1
Slash Body Protection
How do I protect my Slash's body? Would electrical tape or duct tape work?
#3
Tech Champion
iTrader: (168)
I tried some fiberglass reinforced tape where the front and rear tires wear on the body. The rear held up well but the fronts wore through the tape and started taking paint off the body. So I found some plastic (I used the dividers from those multi-compartment boxes) and bent it so it matched the contour of the body where the front wheels rub. I taped it on using the fiberglass tape. The tape is worn through, but the plastic is holding up so far.
#5
I think you need to add 15mm of fuel tubing to your shock shafts, get your tires to stop rubbing the body. Problem solved.
#6
drift buggy is right.. race tape/
you can also shoe goo some old lexan pieces in where the trouble spot is.
you can also shoe goo some old lexan pieces in where the trouble spot is.
#8
Suspended
#9
Tech Master
iTrader: (8)
Join Date: May 2007
Location: BULLET TOWN RC RACEWAY, MILAN TN.
Posts: 1,614
Trader Rating: 8 (100%+)