At Hot Rod's, Paul was running a custom rear tower on his truck. As it turned out, the hole he ended up using on his corresponds to the 2nd hole on the buggy carbon fiber tower, which is what I'm using on mine.
__________________
I think the avatar says it all...
Team Tekin, Team CBA
At Hot Rod's, Paul was running a custom rear tower on his truck. As it turned out, the hole he ended up using on his corresponds to the 2nd hole on the buggy carbon fiber tower, which is what I'm using on mine.
Yup, I made that tower. The height is based on a T4 or the shocks would be too long. It is about 1/4" taller than a buggy tower and, yes, the holes on the truck tower and the holes on the buggy tower are the same width apart. They are just in different arcs. BK is designing the final tower so it may be different from what you saw.
__________________
X Factory X-60 - Keep on Truckin'
__________________
Outback RC Raceway -- Organized Racing, I-Lap Scoring System
Electric Outdoor Off-Road Track, McHenry County, IL near Marengo
www.OutbackRC.com or our RcTech thread for full Details
The body wouldn't fit right on the x-6t, as the chassis is differnt then a t4 chassis. But the wheels would bolt right on (well with the use of a few nuts )
__________________
gone banana`z racing banana`z skin`z for all your foam tires need
2wdrc x-60 x-6 novak gtb, smc lipo
Cheese City Xtreme RC
FULLCOLORASSAULT body wraps
)
Similar Threads