x60 truck - Page 28

gone banana · 03-13-2009, 07:12 PM

paul

is speed daddy bk

Khador12 · 03-14-2009, 05:48 AM

Quote:

Originally Posted by gone banana

did the foam work for u

These tires are working really well. Today are the first round of quals.

Paul_Sinclair · 03-14-2009, 10:54 AM

Quote:

Originally Posted by gone banana

paul

is speed daddy bk

I'm not sure what you mean Rick? If you're referring to SpeedyDad here on the forum, no, that is not BK... that is Chris Krieg, father of X Factory driver Alex Krieg.

SpeedyDad · 03-14-2009, 10:12 PM

If you ever saw me race, you'd know I'm definitely NOT BK

gone banana · 03-15-2009, 07:38 AM

i was try to figure out whos ,, who`s on the thread

last night at marcca i tried some different thing on the x-60 the front shock
i tried 2 piston with 3 limiter and 32.5 oil gold spring shock tower top mid. bottom out side on arm
on the rear i layed the shocks down on the rear shock tower inside hole and on rear arm 3 hole
the rear shocks nu 2 piston 32.5 oil 3 limiter and green spring

i started 3rd in the b main got 32 lap won the b-main bump to the a main start in the 10 finish 8th

ttboyy2k · 03-15-2009, 09:50 AM

Paul can we get a copy of Kinwald's x-60 setup that he used this year at the Cactus? Also, why has he not run 4wd at the last few big races?

Khador12 · 03-15-2009, 02:57 PM

Gone Banana`z Racing Skins are awsome. With these and the X-60 truck I raced on my third different surface in the last month. With a few small changes My X-60 was dialed. The driver made to many mistakes and did not qvery well in qualifying. Started third in the A-main and lead for half of it before making a bobble. Ended up second in the end.

Thanks again to Gone Banana for the tires. Have you tried them on asphalt yet?

gone banana · 03-15-2009, 03:04 PM

they work on asphalt but wear faster

to let people know i mount foam on xxxt cr quickchange rims.

Khador12 · 03-23-2009, 09:33 AM

This past weekend my break from racing showed. I had a pushing issue that would not go away. I am running a 13.5 class and the kit setup for AE shocks. The truck would turn in good but would push in sweepers and other on power areas. The track surface is a indoor clay, top soil mix. It is high bite. I think the problem is to much rear traction. I was running the J Concepts Bar-codes in gold compound With the big Y to the inside on all four corners. What can I do to increase the on power steering?

gone banana · 03-24-2009, 04:20 PM

khardor12 thank you for the t shirt it really nice of you i will mail
you the front out thurs. night

thank you
rick seffrood
gone banana`z skin`z

DIRT · 03-25-2009, 02:18 AM

Quote:

Originally Posted by ttboyy2k

Paul can we get a copy of Kinwald's x-60 setup that he used this year at the Cactus? Also, why has he not run 4wd at the last few big races?

There on the last page of the Xfactory 09 thread

gone banana · 04-05-2009, 07:22 AM

update on my x-60 i took the t4 shock off my x-60 and put losi shock on and what improvement it made i race indoor offroad carpet i think the losi shock are what the x-60 was made for last night i was jumping a 16 foot table all night long and making it everytime everyone else was landing on top and then drive off it

now the indoor carpet is about done until fall i think i`m going to race it outdoor with slashes to work on my dirt racing outside

it pretty cool to having a truck that is working

gone banana · 04-15-2009, 12:04 PM

guy it does not matter how the body are mounted as long it work for you
my son & i bought 4 body the first crack out in the back so being maintenance man i did something different to make them last longer if it right or wrong i do not know i`m still happy with the x-60 i love it more with losi shock on it

gone banana · 04-17-2009, 01:57 PM

here r some more pic.

i went back to the gt2 body because it alot like cheating

RCHobbyGuy · 04-20-2009, 04:31 PM

i bought a conversion used i have it together i will post pics soon