Mamba Max settngs in 10th scale Trucks..List them..
#1
Mamba Max settngs in 10th scale Trucks..List them..
i pulled my mm out of my 8T, an put it back in my rc10ftt3 (i have a 5700kv cc motor), my gering is 19/84 or 20/87 (not sure its been a while, but i have 7 other pinons 16,17,18,19,20,21,22 an a 23 or 24) an i have a 2s 8000mah Maxxamps lipo in it....
anyway i just wanted to know what settings u guys run on ur Mamba Max?
70-50-40-30%- or no limit 0%
an what timming,
0-lowwest - 5-low - 10-high - or highest
an do u use dragbrake?
if so whats the max u race with...
its been awhile since i drove my mm/5700 1/10th scale truck....
and i need a good starting point as my laptop needs to be fixxed an its hard to use my desktop pc too chane my sttings, an i have my track out in my backyard(btw im handycap, a c4-5 quadrapaligic,in a e-wheelchair so i need someone to plug my mm to my pc & plug my battery in as i dont have the use of my fingers).....
btw thats y i love my electric 8T(i was one of the first brushless truggys , an i think i was the 1st to convert a 8T
its hard to start , tune , run , then an refill the gas every 8mins( even more so cus i need a friend or my dad or cusin , to do it, an most dont know how to tune a nitro, so i had to tell them...
I LOVE THIS HOBBY/SPORT , NOW EVEN MY MOM CAN JUST PLUG MY BATTERY IN MY BRUSHLESS 8T TRUGGY , AN I CAN HAVE FUN
i cant wait till i get my MMM from rcmonster.com....
AN THEN I CAN DRIVE 2 PACKS IN A ROW(about 40+mins).. HECK MABEY ALL 3 ,AN MABEY A 4th PACK THAT IM LOOKING TO BUY
ok off topic..lol..
List what Truck,
Motor(4600,5700,6900,7700)
AND POST WHAT UR SETTINGS ARE(on th MM)...
anyway i just wanted to know what settings u guys run on ur Mamba Max?
70-50-40-30%- or no limit 0%
an what timming,
0-lowwest - 5-low - 10-high - or highest
an do u use dragbrake?
if so whats the max u race with...
its been awhile since i drove my mm/5700 1/10th scale truck....
and i need a good starting point as my laptop needs to be fixxed an its hard to use my desktop pc too chane my sttings, an i have my track out in my backyard(btw im handycap, a c4-5 quadrapaligic,in a e-wheelchair so i need someone to plug my mm to my pc & plug my battery in as i dont have the use of my fingers).....
btw thats y i love my electric 8T(i was one of the first brushless truggys , an i think i was the 1st to convert a 8T
its hard to start , tune , run , then an refill the gas every 8mins( even more so cus i need a friend or my dad or cusin , to do it, an most dont know how to tune a nitro, so i had to tell them...
I LOVE THIS HOBBY/SPORT , NOW EVEN MY MOM CAN JUST PLUG MY BATTERY IN MY BRUSHLESS 8T TRUGGY , AN I CAN HAVE FUN
i cant wait till i get my MMM from rcmonster.com....
AN THEN I CAN DRIVE 2 PACKS IN A ROW(about 40+mins).. HECK MABEY ALL 3 ,AN MABEY A 4th PACK THAT IM LOOKING TO BUY
ok off topic..lol..
List what Truck,
Motor(4600,5700,6900,7700)
AND POST WHAT UR SETTINGS ARE(on th MM)...
#3
Tech Elite
iTrader: (109)
associated ft t4
2 cell 3800 lipo
mamba max 5700 system
16/87 gears (you can use 17 pinion but motor temps got close to 200*)
esc settings:
proportional w/o reverse
40% brake
reverse throttle 50%, but i have no reverse
punch control 10%
drag brake 20%
start power medium
motor timing normal
2 cell 3800 lipo
mamba max 5700 system
16/87 gears (you can use 17 pinion but motor temps got close to 200*)
esc settings:
proportional w/o reverse
40% brake
reverse throttle 50%, but i have no reverse
punch control 10%
drag brake 20%
start power medium
motor timing normal
Last edited by LOW ET; 05-14-2008 at 12:56 PM.
#5
Tech Regular
T4 FT
6 cells nimh Intellect 4200 WC (KBOOM edition )
Tekin redline 448 (4800 kv)
23/87 (slighlty overgeared in order to absorb excess torque on low grip situation), might be better geared between 19 to 21 on a "normal" track.
ESC,
Straight / proportional throttle
Punch control 10 %
Brake 60 %
Start power : low
No drag brake
Timing , from 4 to 10, I play alot with it recently to lower the temp of my setup.
6 cells nimh Intellect 4200 WC (KBOOM edition )
Tekin redline 448 (4800 kv)
23/87 (slighlty overgeared in order to absorb excess torque on low grip situation), might be better geared between 19 to 21 on a "normal" track.
ESC,
Straight / proportional throttle
Punch control 10 %
Brake 60 %
Start power : low
No drag brake
Timing , from 4 to 10, I play alot with it recently to lower the temp of my setup.