1/10th 2wd race truck class
#1
1/10th 2wd race truck class
Hey all: With more entries coming for this class that's becoming popular again thought we could talk about it here. Was woundering what's the latest including possible release dates on new trucks from kyosho,x-factory,team academy and hb. Finally please feel free to show pics of your 1/10th 2wd race truck. Hope this thread takes off thanks for the input
#2
Tech Regular
iTrader: (1)
Hey all: With more entries coming for this class that's becoming popular again thought we could talk about it here. Was woundering what's the latest including possible release dates on new trucks from kyosho,x-factory,team academy and hb. Finally please feel free to show pics of your 1/10th 2wd race truck. Hope this thread takes off thanks for the input
well X factory had the X-60 out at the cactus and kyosho had a prototype but no offical word on the others as fars as i know
#4
Tech Adept
The K-truck looked good at cactus. Rhode won the SRS truck class with his. Survived the whole 15 minute main.
#7
Tech Apprentice
#10
#14
Brian Kinwald recently made the A at the Cactus with his prototype X Factory X - 60 truck.
Progress on the X Factory truck is going well - prototyping is near complete and we're starting to draw up stuff as a precursor to starting on molds. If everything continues well we're looking at a release date sometime in the late fall.
Progress on the X Factory truck is going well - prototyping is near complete and we're starting to draw up stuff as a precursor to starting on molds. If everything continues well we're looking at a release date sometime in the late fall.
#15
Tech Master
The RC Pro Series-Nitro is letting 2wd 1/10th scale electric stadium trucks run with the Gas Truck class this year. The mains will be 30 minutes long so run time is not a problem with a 7.5 brushless motor and an 8000 mah li-po.
More info here: http://nitrooffroad.rcprosites.com/s...view/year/2008
The first RC Pro Series-Nitro East Region Race is next weekend at Avon Park, FL. See ya'll there!
More info here: http://nitrooffroad.rcprosites.com/s...view/year/2008
1/10 2WD OFF-ROAD TRUCK SPECS
All trucks must be 2wd.
Minimum track width - continuous 10 feet
Maximum truck length - 18”
Maximum truck width - 13”
Truck wheel base - Minimum - 9” Maximum - 11.5”
Minimum Truck weight - 2WD - 60 ounces = 3lbs. 12oz.
Truck wheel diameter - Minimum-mounting bead - 2.175” Maximum mounting bead 2.25" Maximum overall - 2.46”
Wheel mounting - Must be securely mounted at all times.
Maximum Truck wheel width - 2”
Truck tire width - Minimum - 2" Maximum - 2.125”
Minimum Truck tire diameter - 3.6”
Wheel cut out - Use body cut lines
Engine - .12 . This year a .15 RTR or 4 stroke .26 is legal. This is an effort to help grow this class due to the drop in interest in 1/10 Trucks.
Motor - Brushed or Brushless - Mod or stock.
Electric Trucks conforming to the rules of this class will be allowed to participate. That means they must meet the minimum weight. Electric trucks must make pit stops during mains. The appropriate number to be determined at each event which will be equal to the number of stops for the largest majority of nitro powered truck. This addition is to help increase interest in the truck class.
Fuel - Nitro mixtures only. Maximum allowed 75 mililitres/cc for the tank, filter(s) and fuel line from tank to carb.
Power - NIMH, NICD, Lipo maximum voltage of 7.4v
Transmission - 1 speed only - viscous or slipper drivers are allowed
Rear suspension – Independent
Main events - 5 to 60 Minutes
Bodies - Off-road Truck
Tires - Rubber only
All vehicles must meet the 85db rule for noise.
62: Exhaust pipes are also required on every car. The maximum sound level is 85 decibels, measured at a ninety degree angle to the side of the car from a distance of 30 feet, 3 feet above the ground, with the car at maximum throttle and at all speeds
All trucks must be 2wd.
Minimum track width - continuous 10 feet
Maximum truck length - 18”
Maximum truck width - 13”
Truck wheel base - Minimum - 9” Maximum - 11.5”
Minimum Truck weight - 2WD - 60 ounces = 3lbs. 12oz.
Truck wheel diameter - Minimum-mounting bead - 2.175” Maximum mounting bead 2.25" Maximum overall - 2.46”
Wheel mounting - Must be securely mounted at all times.
Maximum Truck wheel width - 2”
Truck tire width - Minimum - 2" Maximum - 2.125”
Minimum Truck tire diameter - 3.6”
Wheel cut out - Use body cut lines
Engine - .12 . This year a .15 RTR or 4 stroke .26 is legal. This is an effort to help grow this class due to the drop in interest in 1/10 Trucks.
Motor - Brushed or Brushless - Mod or stock.
Electric Trucks conforming to the rules of this class will be allowed to participate. That means they must meet the minimum weight. Electric trucks must make pit stops during mains. The appropriate number to be determined at each event which will be equal to the number of stops for the largest majority of nitro powered truck. This addition is to help increase interest in the truck class.
Fuel - Nitro mixtures only. Maximum allowed 75 mililitres/cc for the tank, filter(s) and fuel line from tank to carb.
Power - NIMH, NICD, Lipo maximum voltage of 7.4v
Transmission - 1 speed only - viscous or slipper drivers are allowed
Rear suspension – Independent
Main events - 5 to 60 Minutes
Bodies - Off-road Truck
Tires - Rubber only
All vehicles must meet the 85db rule for noise.
62: Exhaust pipes are also required on every car. The maximum sound level is 85 decibels, measured at a ninety degree angle to the side of the car from a distance of 30 feet, 3 feet above the ground, with the car at maximum throttle and at all speeds