Hi, I put this brushless Revo together last year and have been posting on other sites, I thought I would share some info here. I started out with a Revo roller and removed the gas tank and radio/servo boxes. I made some custom battery holders, mounting hardware for the servos, custom carbon fiber plate for the ESC and custom brake linkage. I installed the single servo mod and steering travel mod. I wanted to retain the Revo tranny and disc brake, so I used a custom motor mount that utilized the stock nitro mount. I had a Novak HV 6.5 system in my E-maxx and I transplanted that to the Revo, I later upgraded the motor to a Novak 4.5 HV. Recent updates are, Tekno extended a-arms, RPM carriers, alloy push/tie rods, alloy shock parts, stiffer springs and heavier oil. Spektrum telemetry system, close ratio gear set, FOC, Center diff and rear brake. I have custom diffs that utilize 1/8 buggy diffs. The "Evo" handles like a dream, jumps well and is very fast (out accelerates my nitro truggy).
With a Crowd Pleazer 2.0 body, I am currently running it with a stock Revo truck body.