what is this:
 

http://gallery.upshizzle.com/albums/04.07/P1010259.JPG

http://gallery.upshizzle.com/albums/04.07/P1010260.JPG

http://gallery.upshizzle.com/albums/04.07/P1010261.JPG

i believie its a trinity midnight 19t am i correct?

is this the Bk 1 or 2 or wat is it?
http://gallery.upshizzle.com/albums/04.07/P1010247.JPG

If I am not mistaken, that's a stock motor from Trinity. When those were out, 19T wasn't even a real class yet. Look at the endbell, it should read ROAD 98 or something like that.

Here:
http://members.tripod.com/~mustang88/midnight.htm

Jon

The Trinity Midnight is a 27 turn motor, one of the last Trinity made before they started with the rebuildable stocks. The transmission is from a XX or XXT, it's hard to tell without reading the ratio on the side of the case. If it says 2.19 it's from the buggy and if it's 2.61 it's from the truck. Cool stuff, especially the hydra drive on the slipper.

-James

The buggy is a Team Losi XX-CR. It is not a BK1. This buggy dates back to when Kinwald switched from Associated to Losi. After their JRX-pro buggy came the XX series and then the XXX series. I would say this buggy is from around 1994ish.

Had one, it was pretty good. It didn't like the rough sections too much though. The hydra-drive was nice. The improvements they made from the XX series to the XXX series were incredible.

Jon

so its old....it not even put all the way together wither i might trade for it .....are parts easy to come by or is there a conversion i should do

the xxcr came out in late 1996.

.

There is no conversions for it. The differences between the XX and the XXX are great. It would be a cool kit to have on the shelf though, it's a great piece of r/c history. Parts may also be very hard (if possible) to find.

Jon

ok then im not getting it

its a XX-CR gearbox with the hydra-drive on it.

awesome setup. I used it for a few years with great success.

I just destroyed one of those recently :) ... one of my old xxcrs from back in the day. They aren't meant to do flips at 70mph :D zoom zoom vid and broke it

Then last week I slid too far and used the curb as a stop... bent the cvd and broke the rear arm and camber link.... dumb driver :nod: