Goin' brushless, need gearing help. xx4
#1
Goin' brushless, need gearing help. xx4
Question.
I'm running a 11x1 in my xx4. I'm geared at 15/86. (small track). I'm going to the vector 6.5 brushless. Currently I come off the track at around 150 degrees on the can. What would be a good starting point for gear ratios on th 6.5 and what is a good temp to run at?
Thanks!
I'm running a 11x1 in my xx4. I'm geared at 15/86. (small track). I'm going to the vector 6.5 brushless. Currently I come off the track at around 150 degrees on the can. What would be a good starting point for gear ratios on th 6.5 and what is a good temp to run at?
Thanks!
Last edited by Dougg; 03-12-2007 at 07:03 PM.
#2
About the same gearing... or even drop to a 14.
150 is actually not a bad temp... I don't like my stuff running over 170s. Best case is probably 130-140... that would be really good.
150 is actually not a bad temp... I don't like my stuff running over 170s. Best case is probably 130-140... that would be really good.