JConcepts Thread
#4336
Tech Regular
#4338
Tech Master
iTrader: (14)
#4339
yeah he was the only big driver though.
#4341
Tech Master
iTrader: (42)
Evans pretty much cleaned up that weekend, Tanner very well may have had the worst weekend of his life. The only one even capable of giving Evans a run for his money was Numan, who just couldn't keep it together. Here are the results, he was just on a level of his own... He was on JC rubber though (must have been the tires lol).
#4342
JConcepts Official Worlds T-shirt
The 2011 IFMAR Worlds was a big moment for JConcepts by virtue of being awarded the honor of official tire of the World Championships. The JConcepts Racing Team sported a new t-shirt during the event which commemorated the event and occasion. The bright blue t-shirt pops with excitement with combined imagery showing the Finnish traditional Coat of Arms in the background and streaking JConcepts.net logo as the main front logo. The back of the t-shirt shows an even larger logo detailing the chosen tires and displaying the tag, official race tires of the 2011 IFMAR World Championships, Vaasa, Finland.
2011 IFMAR World Championships – Race Facts
Double Dees tires in green compound were the tire of choice in the 2wd class and Flip Outs in green compound were the tire of choice in the 4wd class. The 2wd front tire option was open; however JConcepts emerged victorious with the Rips front tire in green compound taking home the top honors in the 2wd class.
Features:
· Bright blue color
· 100% cotton t-shirt material
· 2011 JConcepts logo front, rear and Finnish Coat of Arms.
· Stylish image design combining logos, graphics and Finnish tradition
JConcepts – Official Worlds T-shirt – 2011 (blue, medium)
Part # 2101M
JConcepts – Official Worlds T-shirt – 2011 (blue, large)
Part # 2101L
JConcepts – Official Worlds T-shirt – 2011 (blue, x-large)
Part # 2101XL
JConcepts – Official Worlds T-shirt – 2011 (blue, xx-large)
Part # 2101XXL
JConcepts – Official Worlds T-shirt – 2011 (blue, xxx-large)
Part # 2101XXXL
The 2011 IFMAR Worlds was a big moment for JConcepts by virtue of being awarded the honor of official tire of the World Championships. The JConcepts Racing Team sported a new t-shirt during the event which commemorated the event and occasion. The bright blue t-shirt pops with excitement with combined imagery showing the Finnish traditional Coat of Arms in the background and streaking JConcepts.net logo as the main front logo. The back of the t-shirt shows an even larger logo detailing the chosen tires and displaying the tag, official race tires of the 2011 IFMAR World Championships, Vaasa, Finland.
2011 IFMAR World Championships – Race Facts
Double Dees tires in green compound were the tire of choice in the 2wd class and Flip Outs in green compound were the tire of choice in the 4wd class. The 2wd front tire option was open; however JConcepts emerged victorious with the Rips front tire in green compound taking home the top honors in the 2wd class.
Features:
· Bright blue color
· 100% cotton t-shirt material
· 2011 JConcepts logo front, rear and Finnish Coat of Arms.
· Stylish image design combining logos, graphics and Finnish tradition
JConcepts – Official Worlds T-shirt – 2011 (blue, medium)
Part # 2101M
JConcepts – Official Worlds T-shirt – 2011 (blue, large)
Part # 2101L
JConcepts – Official Worlds T-shirt – 2011 (blue, x-large)
Part # 2101XL
JConcepts – Official Worlds T-shirt – 2011 (blue, xx-large)
Part # 2101XXL
JConcepts – Official Worlds T-shirt – 2011 (blue, xxx-large)
Part # 2101XXXL
#4343
JConcepts New Release – SC10 4×4 Over-Tray
Illuzion – SC10 4×4 over-tray – protects chassis from excessive debris
Part # – 2137
(fits Team Associated SC10 4×4)
When racing or bashing on a loamy or top soil track surface the inside of the SC10 4×4 chassis can become loaded with dirt or debris which creates extra weight. With the JConcepts over-tray these worries are minimized with the simple and functional over-tray. Fitting nicely under the body; the JConcepts over-tray hugs the outside dimension of the SC10 4×4 chassis protecting the inside from unwanted excess dirt and debris build-up during racing conditions.
The over-tray fits snug around the entire chassis structure while being attached in the front and rear with a simple body clip or hook and loop tape (or Velcro if you prefer) on the sides for easy access. The over-tray is built with extra height and rake to provide extra room for various electrical and battery configurations. The back-side of the lovers can be cut out for air to escape. Holes can be added anywhere to release air but will also allow more dirt in. Trim the over-tray as needed to match your power and protection requirements.
Features:
· Original JConcepts simple design and function
· Durable clear polycarbonate material can be painted or wrapped
· Plenty of clearance for various electrical and battery configurations
· JConcepts – World Proven Innovation and Design
*over-tray shown is trimmed and mounted, actual part comes clear and untrimmed.
Illuzion – SC10 4×4 over-tray – protects chassis from excessive debris
Part # – 2137
(fits Team Associated SC10 4×4)
When racing or bashing on a loamy or top soil track surface the inside of the SC10 4×4 chassis can become loaded with dirt or debris which creates extra weight. With the JConcepts over-tray these worries are minimized with the simple and functional over-tray. Fitting nicely under the body; the JConcepts over-tray hugs the outside dimension of the SC10 4×4 chassis protecting the inside from unwanted excess dirt and debris build-up during racing conditions.
The over-tray fits snug around the entire chassis structure while being attached in the front and rear with a simple body clip or hook and loop tape (or Velcro if you prefer) on the sides for easy access. The over-tray is built with extra height and rake to provide extra room for various electrical and battery configurations. The back-side of the lovers can be cut out for air to escape. Holes can be added anywhere to release air but will also allow more dirt in. Trim the over-tray as needed to match your power and protection requirements.
Features:
· Original JConcepts simple design and function
· Durable clear polycarbonate material can be painted or wrapped
· Plenty of clearance for various electrical and battery configurations
· JConcepts – World Proven Innovation and Design
*over-tray shown is trimmed and mounted, actual part comes clear and untrimmed.
#4344
JConcepts New Release – 6.5″ Wide Hi-Clearance Wing
Illuzion – 6.5″ wide Hi-Clearance wing
Part # – 0123
UPC Code – 845937006455
(0219, 0220 direct replacement – fits TLR 22)
Hi-Clearance wing now available as a direct fit for the TLR 22.
1/10th buggies are very dependent on the rear wing for traction, flight control and balance. The Hi-Clearance wing from JConcepts incorporates several important elements making it the most versatile JConcepts wing yet. JConcepts has joined the high-performance wing into a paired combination that is easier to trim, detail and finish. Each performance wing package now includes 2 wings for added value to the customer.
Debuted at the 2011 IFMAR World Championships, the Hi-Clearance wing design has been used with success on medium to large sized tracks where fast, at-speed handling is required. The Hi-Clearance feature provides extra clearance for the expansion of tires during high acceleration points and especially on high speed straight-aways. The extra tire clearance also allows for full suspension movement during hard landings and full compression during corning. The 6.5” wing has multiple gurney heights to adjust straight-line stability for all conditions. The wing is marked and dimpled for quick mounting on the TLR 22 buggy, the 6.5” wing can also be fit to almost any 1/10th buggy available.
Features:
· Hi-Clearance – 6.5” width design
· Direct fit on the TLR 22 buggy
· Cut-lines for multiple gurney heights
· Includes 2 wings in each package
· Clear polycarbonate with protective film
Illuzion – 6.5″ wide Hi-Clearance wing
Part # – 0123
UPC Code – 845937006455
(0219, 0220 direct replacement – fits TLR 22)
Hi-Clearance wing now available as a direct fit for the TLR 22.
1/10th buggies are very dependent on the rear wing for traction, flight control and balance. The Hi-Clearance wing from JConcepts incorporates several important elements making it the most versatile JConcepts wing yet. JConcepts has joined the high-performance wing into a paired combination that is easier to trim, detail and finish. Each performance wing package now includes 2 wings for added value to the customer.
Debuted at the 2011 IFMAR World Championships, the Hi-Clearance wing design has been used with success on medium to large sized tracks where fast, at-speed handling is required. The Hi-Clearance feature provides extra clearance for the expansion of tires during high acceleration points and especially on high speed straight-aways. The extra tire clearance also allows for full suspension movement during hard landings and full compression during corning. The 6.5” wing has multiple gurney heights to adjust straight-line stability for all conditions. The wing is marked and dimpled for quick mounting on the TLR 22 buggy, the 6.5” wing can also be fit to almost any 1/10th buggy available.
Features:
· Hi-Clearance – 6.5” width design
· Direct fit on the TLR 22 buggy
· Cut-lines for multiple gurney heights
· Includes 2 wings in each package
· Clear polycarbonate with protective film
#4346
We have an actual "CLASH" website for all the info (click on logo) and threads on rctech - Click Here
#4347
Which holes do I use
Just bought the new highflow SCT body for my SC10. Does anyone know what holes I need to use to mount it? The front has 3 holes options and the rear has 2...
Thanks
Thanks
#4348
#4350
Tech Regular
blue compounds
J,
Is there any thoughts of putting Flip outs or GBs in blue compounds? My favorite tires right now just wanting more life out of them.
Is there any thoughts of putting Flip outs or GBs in blue compounds? My favorite tires right now just wanting more life out of them.