JConcepts Thread
#6151
http://www.amainhobbies.com/product_...ion-Body-Clear
So this would be the correct body for my 8.2e, correct. How is the clearance with the batteries? I'm having an issue with my associated body when I run 2-2s batteries and all the wires there.
So this would be the correct body for my 8.2e, correct. How is the clearance with the batteries? I'm having an issue with my associated body when I run 2-2s batteries and all the wires there.
What are the odds of you posting some pictures of that new Tekno EB48 Finnisher Body for us? They should've had pictures out by now right?
Thanks for your time.
Thanks for your time.
#6153
Mainly because the tire was designed when 2wd Slash was the only SCT and they desperately needed Super Soft. Secondly; 98% of the time surface conditions call for a step-pin type tires, the tire performs best in the super soft compound.
#6155
Paul
I sent you a PM I could use some help thank you
jerry
I sent you a PM I could use some help thank you
jerry
#6157
tschenck...Can you edit your post for a smaller pic
#6159
Thanks Paul for your help and ththe e information is greatly appreciated I will give it a try what are the 3202 tire inserts 4 are they firmer than the stock in search that come with the tire I noticed on the setup sheet they're using a different insert thanks Jerry
#6160
When the track is smooth and med/high-bite, I like to run the Blue closed cell inserts (3206-1/rear - 3204-1/front). If the track is dusty and med/low-bite then I like the stock white inserts. I would recommend the stock inserts for now.
#6161
Ok thanks. I looked up the shocks piston part 6465. They look like what I am using now. That came with the kit b4. 1. Unless the kit ones are bad?
#6163
Black compound is normally used for cold weather indoor or outdoor slick groove conditions and or night time wet groove conditions.