JConcepts Thread

You're on Page 286 of 634
Go to
  • Quote: The Crow Bars have a tremendous amount of traction, but they can become very edgy on rough tracks. They are great on loamy tracks that don't have a lot of sharp-edged ruts in corners.
    Sorry to have so many question but not working now so im on a real tight budget. I liked the bigger spacing in Crow Bars over Subs just not sure if they will be good on the track when its harder. I really thank you for your time.
    Don
  • After only one session (2 battery packs) at the track with my GooseBumps, I noticed a few of the studs have torn clean off...Is this just going to happen due to the compound or did I get a defect? Regardless, I did really like how they made my 22 feel
  • Bad batch, I had a set of GBs 8th scale perfect. I had a set of double crosses same problem u had with GBs.
  • Quote: After only one session (2 battery packs) at the track with my GooseBumps, I noticed a few of the studs have torn clean off...Is this just going to happen due to the compound or did I get a defect? Regardless, I did really like how they made my 22 feel
    it might not be a defect, it could of happened if/when u were stuck on a pipe and then when u hit the throttle u could of torn the studs off on the pipes! i've seen this happen alot!!
  • Which part# of the Short-Course Rulux wheels are the correct (i.e. OEM) offset for the Kyosho SC-R?
  • Is there an ETA on the Hazard wheels for the SC10? Waiting to run my SC until i get these and im getting antsy..
  • Quote: it might not be a defect, it could of happened if/when u were stuck on a pipe and then when u hit the throttle u could of torn the studs off on the pipes! i've seen this happen alot!!
    Very true and quite possible. Thanks!
  • Oh looky what I found! Woohoo!

    http://blog.jconcepts.net/2011/09/ne...flow-sct-body/
  • Quote: Oh looky what I found! Woohoo!

    http://blog.jconcepts.net/2011/09/ne...flow-sct-body/
    Wow, that looks good!
  • So you're saying a plastic pipe can knock off the lugs? You're assuming he was hung up also myself. I can't speak for him but in my situation they use rope instead of pipe. Most tracks I go to in the area don't use the hard PVC but use the black drain spout pipe.

    For me it was a small batch of lugs gone to the carcass. No pipes just dirt and torque. Lol. Didn't bother me because the tread pattern made the practice tires. But some GBs I would be more disappointed.
  • PW,

    Any interest in doing another TLR22 Buggy body that is not a cab forward design.

    Something like the High Flow Body that you offer for the B4.

    Myself along with a lot of others would love to have that available.

    Regards,
  • so i here some where in the rc world mayfild has a vid on how he cuts his rear foams for his front 2 wheel tires if some one can provid me with that link i be greatful
  • Any word on a rb5 body yet? Punisher or finisher?
  • PW, are the Hazard wheels in white (3344W ?) a possibility in the near future?
  • Just got back from the final Short Course Showdown held at Mikes Hobby Shop. I will see if I can get some questions answered here...

    Quote:
    Matt Trimmings Is there an ETA on the Hazard wheels for the SC10? Waiting to run my SC until i get these and im getting antsy..
    2 more shipments scheduled for this week and next; so hopefully Thursday or Friday .

    Quote:
    MarkA Which part# of the Short-Course Rulux wheels are the correct (i.e. OEM) offset for the Kyosho SC-R?
    3322

    Quote:
    ZipTie Any interest in doing another TLR22 Buggy body that is not a cab forward design.

    Something like the High Flow Body that you offer for the B4.

    Myself along with a lot of others would love to have that available.
    Unfortunately no; the stock body looks nice with the std cab and we like to keep things different.

    Quote:
    sstoffer PW, are the Hazard wheels in white (3344W ?) a possibility in the near future?
    Yes .

    Quote:
    Ostach24 Any word on a rb5 body yet? Punisher or finisher?
    Nothing yet

    Quote:
    porkchop so i here some where in the rc world mayfild has a vid on how he cuts his rear foams for his front 2 wheel tires if some one can provid me with that link i be greatful
    I haven't heard or seen anything like that.

Similar Threads