X6 XFactory in 07
12-10-2008, 01:52 PM
#392
I plan on running lipos in my new x6 and im curious as to if it is necessary to add weight and if so how much? I will be running on an indoor tight clay track with a lot with med/high grip.
12-15-2008, 04:21 PM
#396
The JConcepts front wing bolts to the back of the shocktower with two included 2-56 button head screws. You have to drill the holes in the tower for it. The best (only) picture I could find of one mounted is here: http://www.jconcepts.net/files/thumb...ont_wing_2.jpg
Mount it up just enough that the body can slip underneath it. You'll probably have to trim on the sides of the wing to make sure it clears the shocks through all travel, too.
I posted the a set-up for the X - 6 with lipo above in this thread, here's the link again: http://www.2wdrc.com/pdfs/Setup-Sinc...HotRod2008.pdf. For medium- to high-bite tracks I really recommend it.
Mount it up just enough that the body can slip underneath it. You'll probably have to trim on the sides of the wing to make sure it clears the shocks through all travel, too.
I posted the a set-up for the X - 6 with lipo above in this thread, here's the link again: http://www.2wdrc.com/pdfs/Setup-Sinc...HotRod2008.pdf. For medium- to high-bite tracks I really recommend it.
12-15-2008, 04:22 PM
#397
I saw kinwald and gang run their cars this weekend. Where can you purchase the kit.
12-15-2008, 04:33 PM
#398
Hello - you can purchase the cars (and all xfactory, AE, and Losi parts for the cars) on our website at www.xfactoryrc.com. Otherwise, there are a growing number of hobby stores around the world beginning to carry X Factory products, check them out on the contact page of our site: http://www.xfactoryrc.com/contact.htm If you don't see your local hobby store on there you can always ask them to give us a call; we have great deals for hobby stores looking to just sell a kit or two or carry the whole line.
12-15-2008, 08:43 PM
#399
Thanks for the reply Paul.
That picture of the wing looks almost insane.
The wing is almost 90 degrees to the direction of air flow.
I'll give it a try. thanks again.
PS: ran the car on weekend, went well after I changed to 4 degree toe in, really happy, racing mate is ordering his today and he's getting the truck too.
Do you guys have sway bars for X6 in stock, or are they a home made item at the moment, couldnt find them on the list of parts.
That picture of the wing looks almost insane.
The wing is almost 90 degrees to the direction of air flow.
I'll give it a try. thanks again.
PS: ran the car on weekend, went well after I changed to 4 degree toe in, really happy, racing mate is ordering his today and he's getting the truck too.
Do you guys have sway bars for X6 in stock, or are they a home made item at the moment, couldnt find them on the list of parts.
12-17-2008, 02:24 AM
#400
We sell the Losi 4257 sway bar kit. It has everything you need, all the metal bits, the little plastic mounts, etc, except that the included sway bars don't fit.
For the bars, go to your LHS and buy piano wire. A really good hardware store will have it too. It comes in ridiculously long lengths for about $2.00 and different thicknesses. Get two or three, from about .045" to .065" so you can play with different bars. Quick & simple to cut & bend your own bar.
For the bars, go to your LHS and buy piano wire. A really good hardware store will have it too. It comes in ridiculously long lengths for about $2.00 and different thicknesses. Get two or three, from about .045" to .065" so you can play with different bars. Quick & simple to cut & bend your own bar.
12-27-2008, 03:15 AM
#402
Bump^^^
01-01-2009, 10:34 AM
#403
With the introduction of the X - 60 -- it's in full production and we are shipping now to dealers & retail customers all over the globe -- and with what's about to happen, somebody needs to start a new thread: X Factory in 2009!
01-01-2009, 10:44 AM
#404
