Tekin Brushless testing!
#106
I'm happy that everyone can see what it's going to look like! Did you see how small it is!? I'm stoked. That will easily fit under the hood of my Yokomo!
#108
Tech Elite
iTrader: (70)
RCaddict-It will be a lil time before that info is released.Testing is being done with higher cell count for people that want just plain go as fast as they can.Mainly bashers are the one's that do this and they have to be accounted for as well.
Just making sure before it's spoken.
I would guess in 30-45 days you should have more of an answer on the questions your asking.
I know this didnt help much but I simply wanted to say that Im not sure if anyone can answer your particular questions at the moment being it's still a month or so away.
Im sure someone directly from Tekin will be answer it in due time.
Les
Just making sure before it's spoken.
I would guess in 30-45 days you should have more of an answer on the questions your asking.
I know this didnt help much but I simply wanted to say that Im not sure if anyone can answer your particular questions at the moment being it's still a month or so away.
Im sure someone directly from Tekin will be answer it in due time.
Les
#109
Spec's can't be discussed yet. They are still working on some things. But knowing what they're up to I'd say that it will be REALLY GOOD
Tekin's not known for releasing a new product only to release a second revision after finding they did something wrong. LRP released the "Competition" version of it's brushless...every look inside and compare it to the non comp.....
Tekin's not known for releasing a new product only to release a second revision after finding they did something wrong. LRP released the "Competition" version of it's brushless...every look inside and compare it to the non comp.....
#110
Will this run brushed motors as well?
#112
Come on Jim, please please let's get these out and in the public eye. Hopefully all will be let out soon as the RCX show is coming soon...
I believe those are solder lugs not plug receptacles...Soldering will provide a much needed low resistance,sercure connection.
I believe those are solder lugs not plug receptacles...Soldering will provide a much needed low resistance,sercure connection.
#113
Last edited by Mike Dana; 10-29-2006 at 03:08 PM.
#114
The R1 has these spec's listed on Tekin's site:
Watch out Orange! Tekin enters the 10th Scale Brushless Market with the all new R1 and R1 Pro!!!!
Using Sensorless technology allows the R1 series to run both Sensored and Sensorless motors. Even more, the R1 series works with both Brushless and Brushed motors! If you are still trying to make the transition to Brushless, this is the ESC for you--you can run your familiar brushed motors until you are convinced that Brushless is the way to go! Other features include Tekin's proven on-board programming, adjustable brake, adjustable throttle, motor timing and even an exclusive built-in temperature monitoring system!
Super small footprints, R1; 1.3" x 1" x .75", R1 Pro; 1.3" x 1" x 1"
That being said, I was fortunate enough to test some of these motors and as far as power goes I felt difference's from the motors anywhere between 14t's to what I would say felt like a 7x1 on steroids! Seriously the weight is comparable to a brushed motor hand to hand. The nice thing is that the driveability of them was phenominal...
Watch out Orange! Tekin enters the 10th Scale Brushless Market with the all new R1 and R1 Pro!!!!
Using Sensorless technology allows the R1 series to run both Sensored and Sensorless motors. Even more, the R1 series works with both Brushless and Brushed motors! If you are still trying to make the transition to Brushless, this is the ESC for you--you can run your familiar brushed motors until you are convinced that Brushless is the way to go! Other features include Tekin's proven on-board programming, adjustable brake, adjustable throttle, motor timing and even an exclusive built-in temperature monitoring system!
Super small footprints, R1; 1.3" x 1" x .75", R1 Pro; 1.3" x 1" x 1"
That being said, I was fortunate enough to test some of these motors and as far as power goes I felt difference's from the motors anywhere between 14t's to what I would say felt like a 7x1 on steroids! Seriously the weight is comparable to a brushed motor hand to hand. The nice thing is that the driveability of them was phenominal...
#115
hell yea
cant wait to see them in action
any idea when the new tekin website will be up and running.id like to see a video section
any idea when the new tekin website will be up and running.id like to see a video section
#117
Tekin's new products and pricing.
Tower finally posted pricing on the new Tekin line! Here ya go!!
http://www2.towerhobbies.com/cgi-bin...in&FVPROFIL=++
http://www2.towerhobbies.com/cgi-bin...in&FVPROFIL=++
#118
Ill keep these in mind, but mamba max is still top of the list. Cant stand my old GTB
#119
Tech Rookie
$220 a piece ?!, they got to be kidding !!. Mamba MAX is almost 1/2 the price.