most definitally need alot more rocks and maybe even one more truck load of palletes.
I can supply a bunch of pallets, and my pile is only 2 blocks from the course I'll have a truck this weekend if someone can meet me there to open the door - or I could even leave them outside, I guess. Not like a little snow will hurt them
Stopped in last night but you guys were already gone, the obstacles look AWESOME so far!!
__________________
Colin Paulovich
AX10, Novak Goat, Chisels and a bunch of other junk.........
www.tntgp.com
We are good to go for the winter series! We will be working with the Racers this winter to run our comps on the same days as they are racing. Going to be a bit different through tthe winter as we want to limit the radios on at any one time. We will be running the competitors 2 at a stage between the race qualifiers. This way ef you want to race you can still crawl! The course is ready to get started, remember it will change through the winter. Please bring your own pit table as there are none on site. Location is huge! The old Brandt Tractor building south of Costco just past the tracks. $5.00 entry for the building use and comp fees will be the same. See you there!
Dont forget to turn your clocks back one hour tonight or you will be at the track an hour early.
Jay is already in bed say's he can't wait to start racing
Randy is at home with his Lights off
The racks look great should be a great season
See you in the am.
Remeber Doors open at 10;00 am
Registration Starts at 11:00 am
Drivers Meeting at 11:45 am
and The Qualies start at Noon Sharp with or without you Rod
Luv Ray
__________________
<<<<<<< Vice President & Director of Racing GPMRA>>>>>>>>
R&S Racing ~ Can u say Zoom - Zoom?
XRAY XB8EC Modified & XT8 09, Associated RC18(Holy Crap Did You See That Thing Go)T
We are good to go for the winter series! We will be working with the Racers this winter to run our comps on the same days as they are racing. Going to be a bit different through tthe winter as we want to limit the radios on at any one time. We will be running the competitors 2 at a stage between the race qualifiers. This way ef you want to race you can still crawl! The course is ready to get started, remember it will change through the winter. Please bring your own pit table as there are none on site. Location is huge! The old Brandt Tractor building south of Costco just past the tracks. $5.00 entry for the building use and comp fees will be the same. See you there!
Sounds good!! I can finally put my crawler too use and mabe see how i stack up against you guys!! My crawlers on the fritz right now though but i still will give it a try.
had a good comp on sunday, lots of people out missed you out there rich. mike and i are going there for tomorrow, first his place to gather the rest of his rocks, we do need a lot more rocks for there, iam pretty sure mike was about one second away from throwing his truck at the wall.
had a good comp on sunday, lots of people out missed you out there rich. mike and i are going there for tomorrow, first his place to gather the rest of his rocks, we do need a lot more rocks for there, iam pretty sure mike was about one second away from throwing his truck at the wall.
You're right, I was about a second away from tossing it! I did some digging on the internet and might be that my problem is that I am too crowded with my ESC and Receiver. I tore it all apart and I'm trying to move everything a bit further away. It's not together but I will be there tonight anyway, maybee just to work on it, maybe I get to drive. I'm almost ready to put the super back together and just get serious with it! see you tonight.
Hey guys i made it back wish i could have made it to the comp but you know work is. let me know the next time you guys go down there hopefully i'll be in town maybe thursday or tomorrow. who won the comp anyway?
__________________
= I'd like to thank my sponsers..........myself
= AX-10 Black Widow crawler
= AX-10 Eclipse tubular
= Tamyia Mud Hiluk
= T Maxx
The GPMRA 2009-2010 Indoor Event Schedule is ready! To make sure you don't miss any events, please save the attached PDF to your computer, print out a copy, and pin it to your wall.
This coming weekend is our first feature race. It will include a show and shine, and a swap meet so if you've got any R/C items you would like to sell or trade, this is the time to do it! Registration will begin at 10:00am.
November 17th is the first RC101 school. It will be held at the track at 7:30pm. The subject of the first class will be... Electronics! So, if you've got any questions about speed controllers, radio equipment, servos, etc... be sure to attend this class!
Thanks to all the enthusiastic racers who came (in great numbers) to the first race of the indoor season. It was a smashing success with the greatest turnout we've ever had at any race ever! (inching towards 40 racers!) Way to go Grande Prairie!
__________________
Gregg "MadHacker" Messenger
Public Relations Director - GPMRA
A bit of a late reminder but we are Comping every Sunday this winter. Looks like we might be splitting the classes a bit as there are lots of Comp trucks and quite a few other 2.2 coming out. For this week we are still running the same format unless we have 6 Comp trucks out (dig/4w steer). I would love to see it split even more into Novice/Comp 2.2 and 2.2 Outlaw (I think Denis would like to see this also) but until we have 6 trucks per catagory we will keep it the same. 13 trucks overall last week and I hope to hit 10 this week! Running order may change as we need to run only 2.4 while the races are on and the FM radios and racers will go between race heats.
Great Comp today, not too many drivers but that's okay with me, lets me get further into the points before I start to really lose!
This week results:
Colin - 1st (16 points)
Derek - 2nd (10 points)
Mike - 3rd (8 points)
Reese - 4th (7 points)
Sheldon - 5th (6 points)
Last week was:
Ryan - 1st (16 points)
Derek - 2nd (10 points)
Colin - 3rd (8 points)
Mike - 4th (7 points)
Sheldon - 5th (6 points)
Overall for the season so far is:
Colin - 24 points
Derek - 20 points
Mike - 15 points
Ryan - 16 points
Sheldon - 12 points
Reese - 7 points
Sad not seeing Richard and Denis there, no love lost from me not seeing Nikki tho! (just kidding Nikki, you know I luv ya!)
hopefully next week goes better for me! maybe ill get a bec and start doing good again and show you guys it wasnt a fluke lol!!! hey derek i was just wondering if that 4 link plate you showed me today was for sale or was just spare parts for your crawlers let me know. Im not sure exactly where to put it as far a front or back and what it really does but i hear that they help quite a bit!
Here thay are guys
You will have thumb through but they are there in amongst the Off and On Road standings
looks Like Colin has been practicing.
__________________
<<<<<<< Vice President & Director of Racing GPMRA>>>>>>>>
R&S Racing ~ Can u say Zoom - Zoom?
XRAY XB8EC Modified & XT8 09, Associated RC18(Holy Crap Did You See That Thing Go)T
hopefully next week goes better for me! maybe ill get a bec and start doing good again and show you guys it wasnt a fluke lol!!! hey derek i was just wondering if that 4 link plate you showed me today was for sale or was just spare parts for your crawlers let me know. Im not sure exactly where to put it as far a front or back and what it really does but i hear that they help quite a bit!
yeah even thow you had it figured out and working good at the end of the day on sunday still get your hands on a BEC, and for those four link plates i made you can have them. i'll make sure i bring them with me on sunday and i'll give you a hand putting them on if you need, and as far as they go you have them man, just make sure you pick up some bal ends to replace the Y for three link.
yeah even thow you had it figured out and working good at the end of the day on sunday still get your hands on a BEC, and for those four link plates i made you can have them. i'll make sure i bring them with me on sunday and i'll give you a hand putting them on if you need, and as far as they go you have them man, just make sure you pick up some bal ends to replace the Y for three link.
well ill give ya something for it haha i dont want to put the time that you took to build it too waste! And as far as the ball ends go would they just be like the ends that all of the other links have on them? just a straight peice of plastic with a hollow ball in the middle where the screw goes through? Im making an order today so hopefully by the end of the week my crawler will be a fairly different truck lol!
I'll have a truck this weekend if someone can meet me there to open the door - or I could even leave them outside, I guess. Not like a little snow will hurt them
or tomorrow. who won the comp anyway?
Similar Threads