74LikesBuy / Sell
04-14-2015, 08:45 PM
#9618
Tech Adept
Tamiya f104 pro V2 roller $250
Used for only two races. Upgraded to aluminum motor mount and carbon fibre damper mount plate.
Includes full set roll springs and full set pitch springs. Soft pit shimuzi front and rear. Some spares. Could include a 21.5 for a little extra.
Associated TC 5 factory team roller SOLD!!
Located in Kelowna and prefer local Saale but will ship at buyers expense.
Used for only two races. Upgraded to aluminum motor mount and carbon fibre damper mount plate.
Includes full set roll springs and full set pitch springs. Soft pit shimuzi front and rear. Some spares. Could include a 21.5 for a little extra.
Associated TC 5 factory team roller SOLD!!
Located in Kelowna and prefer local Saale but will ship at buyers expense.
BUMP. TC 5 is sold, f1 available
04-15-2015, 03:01 AM
#9619
Tech Fanatic
04-15-2015, 07:36 AM
#9620
Spring cleaning
All prices are plus shipping
If a local buys the bodies, I will donate the money to the club.
Bodies, NIP;
HPI 70 Dodge Chalanger-$15.00
Motors;
Kill shot 13.5rpm/rpm(Express Motorsports)-$40.00, will come with extra stator as well.
If a local buys the bodies, I will donate the money to the club.
Bodies, NIP;
HPI 70 Dodge Chalanger-$15.00
Motors;
Kill shot 13.5rpm/rpm(Express Motorsports)-$40.00, will come with extra stator as well.
Last edited by SLOWINSLOWOUT; 04-23-2015 at 05:05 PM.
04-15-2015, 06:01 PM
#9621
For sale reedy 410r
Last edited by bcjason; 04-21-2015 at 10:56 AM.
04-16-2015, 02:59 AM
#9622
Tech Fanatic
looking for mylaps transponder.
04-17-2015, 11:58 AM
#9623
Tech Rookie
Associated TC6.1 FT with electronics
Associated TC6.1 FT with electronics
$500
Tekin RS Stock spec mode
RadioPost 2207M servo
Shuur Speed 17.5
5800 60C Roar Legal Lipo Pack included
AMB Transponder
with three bodies & extra parts
Also available (Negotiable)
Futaba 3PL Transmitter & 2 receivers
Duratrax Pit Stand
$500
Tekin RS Stock spec mode
RadioPost 2207M servo
Shuur Speed 17.5
5800 60C Roar Legal Lipo Pack included
AMB Transponder
with three bodies & extra parts
Also available (Negotiable)
Futaba 3PL Transmitter & 2 receivers
Duratrax Pit Stand
04-19-2015, 01:13 PM
#9625
Race winning Xray T3 2012
tq in victoria speed weekend 2015 2nd in race due to poor driving
2nd Emerald City Classic 2015
this car is very well setup for carpet VTA 25.5 or 21.5
$230obo for roller w/servo
used set of hpi D compound vta tires included
a few spare parts
has 3 race days on the spec r dcj's
j71 vta body or lexus lfa body available
can add D41s 21.5 EA certified for $100 2 race days on it.
Last edited by AlexPate; 04-19-2015 at 01:27 PM.
04-19-2015, 03:51 PM
#9626
Switched to electric this year so I have some JQ parts to get rid of.
New JQB0262 Fuel Tank - $20 including shipping
JQ motor mount set with two sets of top blocks - $40 including shipping
All the parts from a yellow edition including clutch (used for one race weekend) not common with the E-Car kit I bought (excluding motor mounts) - $10 excluding shipping
New JQB0262 Fuel Tank - $20 including shipping
JQ motor mount set with two sets of top blocks - $40 including shipping
All the parts from a yellow edition including clutch (used for one race weekend) not common with the E-Car kit I bought (excluding motor mounts) - $10 excluding shipping
04-19-2015, 08:29 PM
#9627
Tech Adept
iTrader: (4)
Switching brands and going to electric, selling my Losi 8ight 2.0 buggy and full stock of parts. I bought a complete second roller to break down for parts a couple years ago so there very nearly 2 complete rollers here minus a couple parts I used from the second one.
Notables are 2 quick change motor mounts, 2 good bodies, 2 losi clutches, 3rd gen electronics tray (2 2nd gen trays), aluminum 12* incline spindles, LRC rear hinge pin mount and full set of inserts, tony's screw kit, 3 air filter assemblies (no messing with filters during race day), 20 brand new air filters, 2 full sets of diffs, 2 full sets of shocks, extra turnbuckles, extra dogbones, full assortment of sway bars (most unused), full unopened set of Avid bearings.
https://www.flickr.com/photos/mdchri...h/17205964181/
Parts organizers in the pics are not included.
$325 shipped in Canada.
Notables are 2 quick change motor mounts, 2 good bodies, 2 losi clutches, 3rd gen electronics tray (2 2nd gen trays), aluminum 12* incline spindles, LRC rear hinge pin mount and full set of inserts, tony's screw kit, 3 air filter assemblies (no messing with filters during race day), 20 brand new air filters, 2 full sets of diffs, 2 full sets of shocks, extra turnbuckles, extra dogbones, full assortment of sway bars (most unused), full unopened set of Avid bearings.
https://www.flickr.com/photos/mdchri...h/17205964181/
Parts organizers in the pics are not included.
$325 shipped in Canada.
04-20-2015, 05:08 PM
#9628
Looking for TEKNO NT48 ....
Thank
Thank
04-20-2015, 09:29 PM
#9629
Tech Regular
iTrader: (3)
For Sale:
Pt#199120
Hudy 1/10-1/8 Exclusive Roller Bag, newer style with black drawers NOT Grey......SOLD
Pt#108255
Hudy All I One Set-Up System for 1/10 Touring Car......SOLD
Depending on buyers location, everything is + shipping
PM for pix ...email or text
Pt#199120
Hudy 1/10-1/8 Exclusive Roller Bag, newer style with black drawers NOT Grey......SOLD
Pt#108255
Hudy All I One Set-Up System for 1/10 Touring Car......SOLD
Depending on buyers location, everything is + shipping
PM for pix ...email or text
Last edited by Shaun B22; 05-02-2015 at 06:12 PM.
