Thompson Valley RC'ers - Page 71

teamanager · 08-26-2003, 05:22 PM

Rob, talk to Stu. He knows about the tables.

RL Junior · 08-26-2003, 05:30 PM

haha.. Stu told me to ask on here

.. do you thnk anyone would complain if we just borrowed it and made sure it was returned when we got back to town ??

Giuseppe · 08-26-2003, 05:32 PM

Rob Lion Jr

Which tables are you refering to ? Ren has two "grey" tables that the legs fold up, and I have my one "white" tabel that folds in half. I don't know about Ren's but I'm sure he won'mind if he doesn't know that they were bored

And you can borrow mine if you like it may fit a bit better than Ren's but that will be up to you. In either case as long as you don't damage them no one should mind at all.

If there are actual "white" folding tables that aren't the ones from above, than I have no idea who they belong to.

As for the work party will most likely be on Thursday. I don't have much in mind for major jobs, mainly just resurfacing the track and modifying the doubles slightly so they are a little easier to clear. For the Table top I would like to build a wooden base for it but I don't really have the time to do so and I'm not sure as to what supplies (scraps) the club has for wood.

jason

RL Junior · 08-26-2003, 05:37 PM

yep, i think were gonna take urs jason, thanks a bunch.. i will wipe it down for ya if we get it dirty

..haha

FIVE 7 · 08-26-2003, 07:55 PM

Jason.....Lots of wood under the On-Road Drivers stand....plywood and lumber galore.....have at er!

It's got to get done sometime.

Giuseppe · 08-26-2003, 11:45 PM

Thanks

brent I'm so looking forward to spend ing the day cutting and drilling wood together to make a jump that no one will help me move into position. Is everyone going to be able to help out with the jump and other work party activity ? Roll Call PLEASE !!

Your welcome Rob, just remember that there are two red locks theat keep it from folding up on you while in use. Also remember to retract them before you try to fold up the table at the end of the day, I would like a functioning table when I need here.

I'll try to get some sort of drawing done up for the table top and I'll bring a circular saw. If someone has a nefty battery drill to use to put screws in, that would also be a great help, preferably with "charged" or even AC powered.

I'll try to finalize a time tomorrow for everyone to be there.

Jason

FIVE 7 · 08-27-2003, 12:48 AM

Hey Jason.....tell me something else that is new??? Getting a good number of people together for a work party these days is like pulling teeth.

Anyway, I am sorry that I will not be there as I am working nights right now and am then heading to Kelowna for a Race/Family Vacation.

I thought that you were going to Kelowna Jason?

Hey Ren, do you know where the Club Till is??

Take care all

RL Junior · 08-27-2003, 07:28 AM

Hey. I probably won't be able to make it out to the work party, I'm gonna be stuck at home babysitting

. Believe me, I would much rather do a work party than be stuck at home with my little brother and sister, but such is life I guess.. haha.

teamanager · 08-27-2003, 10:25 AM

The till is in the lock-up at the track.

Giuseppe · 08-27-2003, 07:02 PM

Anyone else able to come out to the work party ? Melnyk? Stu?

As for Kelowna, I have to work the whole weekend. But the major problem was that I do not have any mod motors to compete with. The turns that I would prefer are not available from our distributors at this time. But I'm sure that they will be available once the indoor season starts and all I'll want is 10s

later

Stu · 08-27-2003, 07:10 PM

jason, i do not have the chemicals yet, but if you are able to give me a lift, and am good for tomorrow

racerb · 08-27-2003, 07:40 PM

I can't make any promises but if i knew a time I could try to plan for it

Giuseppe · 08-27-2003, 10:24 PM

Around about 12:30pm tomorrow assuming that at least the 3 of us are able to go. And also if it doesn't rain.

If you have a preferred hammer please bring it along as I plan to build a wooden base for the table top then cover it in dirt after its in position.

Later

FIVE 7 · 08-27-2003, 10:27 PM

Don't make it too big with wood, so that we can put lots of dirt on top so that we don't end up with the wood sticking through.

Giuseppe · 08-27-2003, 10:32 PM

The table top at the old, old track was mad of wood and at times the wood just poked through by the end of the season. I figure about 18" high by 5' long and 9' wide(what ever the track width is). So the actual sides will be about 20" high to help contain the dirt.

good night