Sydney Model Autosports Inc [smaracing.org]
#16
when will the next meet be held?
#17
interested
Looks like a great set up , please forward the address of the track , and dates of your next meets for nitro, also do you have computor set up for times etc .....any chance of a contact fone number .............
#18
Re: PRP
Originally posted by danjoy25
VWO: prp design is starting to look like a tub chassis. I will even things next meet so make sure no excuses like not have the proper tires, can't drive electric, etc.
VWO: prp design is starting to look like a tub chassis. I will even things next meet so make sure no excuses like not have the proper tires, can't drive electric, etc.
back on track to topic
can you guys place some dates of when the racing will be held?
could you also provide a address of were this place is located? and is it open to the public on non race days. i wouldn't mind heading down and giving the cars a bash to get a feel for the surface.
make sure the first race day doesn't clash with the nitro drag race organised by penrith.
#19
Tech Apprentice
Next meet at SMA will be Sunday the 12th, we don't really care if this clashes with any existing races.
As the aim of this club is to bring new people to the sport/hobby from an area that has had nothing since CMC indoor closed, we hope to not pull people away from the existing club racing elsewhere.
We are a new club and are still setting up our lap timing equipment, so if you want to come and race/play with your car then please join us. Unfortunately we are not at this stage organised enough to have a flawless race meet, to the standards that existing racers have come to expect.
But we do have a nice track and good facilities, and will be getting better and better.
Surface is smooth Ashpalt, 28 Rubbers work OK or 35 foams aren't bad. It is a fairly tight circuit, roughly the size of a tennis court. Gearing is short, as per Castle Hill.
Nitro does not need a second gear.
If you are interested in something new or closer to home, you are welcome to join us at;
JETS Sports Club,
Holbeach Avenue, (off Princes Highway)
Tempe.
Sunday 12th from 10am until 3pm.
Regards,
Matt Dall (SMA).
As the aim of this club is to bring new people to the sport/hobby from an area that has had nothing since CMC indoor closed, we hope to not pull people away from the existing club racing elsewhere.
We are a new club and are still setting up our lap timing equipment, so if you want to come and race/play with your car then please join us. Unfortunately we are not at this stage organised enough to have a flawless race meet, to the standards that existing racers have come to expect.
But we do have a nice track and good facilities, and will be getting better and better.
Surface is smooth Ashpalt, 28 Rubbers work OK or 35 foams aren't bad. It is a fairly tight circuit, roughly the size of a tennis court. Gearing is short, as per Castle Hill.
Nitro does not need a second gear.
If you are interested in something new or closer to home, you are welcome to join us at;
JETS Sports Club,
Holbeach Avenue, (off Princes Highway)
Tempe.
Sunday 12th from 10am until 3pm.
Regards,
Matt Dall (SMA).
#20
Looks like a nice following track it will be good for gas and new drivers, not many clubs support the new drive these days. So what would be the track size about 30-15m?
Good luck with the new track it has some experience drivers backing it so it should do well
Good luck with the new track it has some experience drivers backing it so it should do well
#21
#22
SMA Club Day
Next Sydney Model Autosports Inc event;
Club Day, Track opens at 10am, 12th of September 2004.
Power Supplied, please bring table, chair and lead.
Cheers,
IDM
Publicity Officer
www.smaracing.org
Club Day, Track opens at 10am, 12th of September 2004.
Power Supplied, please bring table, chair and lead.
Cheers,
IDM
Publicity Officer
www.smaracing.org
#23
Re: SMA Club Day
how 'bout updating that website ay!
pics, location directions, who it's catered for, mission statement maybe? maybe a write up regarding vision for the future etc.
a brief peice on the background of the founders possibly?
pics, location directions, who it's catered for, mission statement maybe? maybe a write up regarding vision for the future etc.
a brief peice on the background of the founders possibly?
#26
Re: Re: SMA Club Day
Originally posted by VenomWorldOrder
how 'bout updating that website ay!
pics, location directions, who it's catered for, mission statement maybe? maybe a write up regarding vision for the future etc.
a brief peice on the background of the founders possibly?
how 'bout updating that website ay!
pics, location directions, who it's catered for, mission statement maybe? maybe a write up regarding vision for the future etc.
a brief peice on the background of the founders possibly?
I'll be taking photos this weekend.
-Paul
#27
Tech Addict
Hmmm.... might blow the dust of the electric car and come for a run too
#28
Originally posted by Besercoe
VWO sounds like something that RCU was set up to do?
VWO sounds like something that RCU was set up to do?
just as a side note i visited the new hobby shop on parramata road in petersham, or leichhardt/stanmore not sure what suburb it falls under and noticed a SMA mailing list there
the shop is pritty good also. some reasonable prices especially on RB motors.
#29
yeah its not a bad shop aye thomas, the guys that wprk there are very nice people aswell.
#30
Originally posted by Team-RTR
yeah its not a bad shop aye thomas, the guys that wprk there are very nice people aswell.
yeah its not a bad shop aye thomas, the guys that wprk there are very nice people aswell.
I spoke to Fred, he said he's gonna get some pro4 parts in soon