AARCMCC RULES IC ONROAD

[Zero_SkillZ]

hi, Decided the aarcmcc rules thread was over run by electric people, and could not be bothered flicking thru 100 pages of electric garbage to see if anyone has any questions or concerns about 200mm ic onroad, 1/8TH ONROAD and 1/5th ONROAD.
So to make life easier for the nitro boys and girls started the ONROAD section to aarcmcc.

so voice your concerns, add updates, ask questions and hopefully we will all be able to get the answers we require without flickig thru 100+ pages of electric questions

[Zero_SkillZ]

the ARCMCC rules are available from
http://www.aarcmcc.org/rules.html

[Zero_SkillZ]

waiting for clarification on this information, but it is possible the states will be run on the old rules for body scruitneering, except for the front window, which will no longer be ( 50% of front screen) it will be 60mm maximum measured from any point. so a circle would be best
The old rule of either front window (50% = now 60mm)
and roof hole for fuel (50mm)
will still apply
or one 50mm hole disecting both roof and window only.

with the same rules for glow plug hole
allowing removal of front side windows and rear window cuts as previous years. but wait for more clarification from people more in the know.

so your pre cut and painted shells might not be illegal now.