TrustMe

THE FOLLOWING LIST ARE BODIES ALLOWED TO BE RUN AT THE NSW STATE TITLES.

THIS LIST EXPIRES 30 DAYS AFTER TITLES RUN, AT WHICH TIME A NEW LIST WILL BE ISSUED.

Scale Type Name / Description

1/10 .12 FUEL TOURING BTCC ACCORD SEDAN GT(200mm)
1/10 .12 FUEL TOURING STRATUS SEDAN GT (200mm)
1/10 .12 FUEL TOURING MAZDA MILLENIA TC (200mm)
1/10 .12 FUEL TOURING DODGE STRATUS (200mm)
1/10 .12 FUEL TOURING BMW E46 (200mm)
1/10 .12 FUEL TOURING VISION S-BODY (200mm)
1/10 .12 FUEL TOURING AUDI A4 (200mm)
1/10 .12 FUEL TOURING ALFA ROMEO 156 (200mm)
1/10 .12 FUEL TOURING HONDA ACCORD (200mm)
1/10 .12 FUEL TOURING DODGE STRATUS (200mm)
1/10 .12 FUEL TOURING VAUXALL VECTRA
1/10 .12 FUEL TOURING VOLVO S-60 SEDAN (200mm)
1/10 .12 FUEL TOURING ALFA ROMEO SEDAN (200mm)
1/10 .12 FUEL TOURING RENAULT LAGUNA (200mm)

1/10 TOURING CAR T2 CHRYSLER 300 M
1/10 TOURING CAR T2 HONDA ACCORD
1/10 TOURING CAR T2 MAZDA MILLENIA
1/10 TOURING CAR T2 OPEL CALIBRA
1/10 TOURING CAR T2 BMW 3-Series
1/10 TOURING CAR T2 HONDA ACCORD
1/10 TOURING CAR T2 ALFA ROMEO 156 (190mm)
1/10 TOURING CAR T2 AUDI A4 (190mm)
1/10 TOURING CAR T2 MERCEDES BENZ DTM
1/10 TOURING CAR T2 98 HONDA ACCORD
1/10 TOURING CAR T2 LEXUS IS 2000 (190mm)
1/10 TOURING CAR T2 ALFA 156
1/10 TOURING CAR T2 OPEL ASTRA DTM
1/10 TOURING CAR T2 VOLVO S-40 W/WING
1/10 TOURING CAR T2 NISSAN PRIMERA
1/10 TOURING CAR T2 NISSAN ALTIMA
1/10 TOURING CAR T2 HONDA ACCORD
1/10 TOURING CAR T2 VOLVO S-40
1/10 TOURING CAR T2 BMW 320i
1/10 TOURING CAR T2 AUDI A4
1/10 TOURING CAR T2 DODGE STRATUS
1/10 TOURING CAR T2 DODGE STRATUS 2.0
1/10 TOURING CAR T2 98 FORD MONDEO/CONTOUR
1/10 TOURING CAR T2 98 ALFA ROMEO 156
1/10 TOURING CAR T2 '98 NISSAN PRIMERA
1/10 TOURING CAR T2 SATURN SC2 SEDAN
1/10 TOURING CAR T2 VAUXHALL VECTRA
1/10 TOURING CAR T2 HONDA 4 DOOR ACCORD
1/10 TOURING CAR T2 DODGE STRATUS(200mm) 2.1
1/10 TOURING CAR T2 VOLVO S-60 SEDAN
1/10 TOURING CAR T2 FREWER/SCHUMACHER STRATUS
1/10 TOURING CAR T2 LEXUS IS 300
1/10 TOURING T2 LEXUS IS 200

PLEASE NOTE THAT 50% WINDSCREEN OPENING IS ALLOWED.

UPDATED RULES NOW AVAILABLE ON NSWRCRCC WEBSITE.

TrustMe

Check NSWRCRCC website www.nswrcrcc.org.au for current body list and rules.

TrustMe

Note that all bodies although approved for use, must also meet Technical Rules regarding wing holes ect. Read rules .


A.G.

Michael_T

iTrader: (52)

Good stuff AG!

tl2111

iTrader: (21)

hey michael

Stratus 2.1 still not within the spec, they 208mm wide.

TL

Michael_T

iTrader: (52)

Tommy its within IFMAR specs, even www.pro-lineracing.com says so.


Not sure how you guys are cutting the body

VenomWorldOrder

2.1 isn't but 2.0 is anyone ever measured the width of the 2.0?

tl2111

iTrader: (21)

That's what I'm try to say, they are wider but aproved which mean you have to cut extra on the wheel arch.


Thomas
Stratus 2.0 states is 190mm but I think they measure up to 198mm

acs

I just measured my current 2.1 and the front is fine but the rear wheel arches are 206. To get it to 205 you would need to cut some fairly large wheel arches to trim some of the flair in them.

acs

Ok, i've just measured my body from 2002 QLD's titles. It was a protoform volvo s60.

The front wheel arches are 206mm with the rear arches being 207mm.

This body passed scrutinering as all it had to do was pass through a 205mm box.

I am assuming that is the standard for measuring width of bodies.

TrustMe

Some bodies can vary from1 to 5 mm.

Guys we just published a list with approved bodies, and you are still looking for reasons not to allow them, I don't understand, why not forget about the bodies, it's clear what can be used, and just get on with it.

When It's said that the body has to meet tech rules, it mainly will be for window cut outs, wing, body height.

There are tolerances allowed for manufacturing.

A.G.

TrustMe

Make sure you read the rules regarding use of body during event.

Michael_T

iTrader: (52)

I currently got 3 used 2.1 bodies, measured them from the inside and outside of the body. The fronts measured at 203mm, whilst the rears were 205mm.

Darkman

hhmm i think i cut mine too high... hehhehe my 2.1 measured at 199 at the front and 203 at the rear, while my 300m measured at 198 at the front and about 200 at the rear... got too scissor happy!