Elcon Imp4ct 4WD 5th Scale Buggy + G4z + loads of spares
#1
Elcon Imp4ct 4WD 5th Scale Buggy + G4z + loads of spares
Selling my Elcon Impact 4wd 5th scale off road buggy
no expense was spared in building this car, it has all the upgrades and i mean ALL
Selling cos i have a baby coming and wont have time to race it.
The car has been meticulously maintained after each race.
Custon G4z 26cc black motor has a drop down coil and flywheel crank is a vhm best there is they dont make them anymore
Hitec HS1000SGT steering servo 100KG
Futaba BLS172SV throttle servo 30KG
Clutch is Tourex big speed 3 there latest one (Spare elcon clutch and clutch bell, spare shoes and springs also)
Lightscale air filter intake and half a dozen air filters
2 x 4s killer RC batteries
installed the extended chassis for better handling
Ceramic bearings all round
XL booster pipe
Crap loads of spares, hinge pins, turnbuckles, arms, clutch, screws, bearing, half a dozen air filters, too much to list but you wont be buying anything for a long time
About 7 full sets of tyres, not all pictured, but ive got heaps, and all with 90% tread
All the shock springs
All the oils and lubricants you need, shock, diff, bearing oil,
Upgraded wheel hubs and a bucket load of wheel nuts
Some tools for opening up the motor/bearing puller etc.
Original chassis spare with original fuel tank cover to suit
Full spare set of gears and pinions
Extended shock mounts for the rear arms, not installed but in with all the spares
Comes with the tool box on wheels to hold all this gear and the swivel car stand the car is sitting on
Theres more but ill stop here cos i could go on for ever...
$4000
Located Brisbane
the only thing it wont come with is a transponder and Sanwa RX 472 micro
if you need those also add $100 for each
if you want any more photos or info just ask i can sms to you
no expense was spared in building this car, it has all the upgrades and i mean ALL
Selling cos i have a baby coming and wont have time to race it.
The car has been meticulously maintained after each race.
Custon G4z 26cc black motor has a drop down coil and flywheel crank is a vhm best there is they dont make them anymore
Hitec HS1000SGT steering servo 100KG
Futaba BLS172SV throttle servo 30KG
Clutch is Tourex big speed 3 there latest one (Spare elcon clutch and clutch bell, spare shoes and springs also)
Lightscale air filter intake and half a dozen air filters
2 x 4s killer RC batteries
installed the extended chassis for better handling
Ceramic bearings all round
XL booster pipe
Crap loads of spares, hinge pins, turnbuckles, arms, clutch, screws, bearing, half a dozen air filters, too much to list but you wont be buying anything for a long time
About 7 full sets of tyres, not all pictured, but ive got heaps, and all with 90% tread
All the shock springs
All the oils and lubricants you need, shock, diff, bearing oil,
Upgraded wheel hubs and a bucket load of wheel nuts
Some tools for opening up the motor/bearing puller etc.
Original chassis spare with original fuel tank cover to suit
Full spare set of gears and pinions
Extended shock mounts for the rear arms, not installed but in with all the spares
Comes with the tool box on wheels to hold all this gear and the swivel car stand the car is sitting on
Theres more but ill stop here cos i could go on for ever...
$4000
Located Brisbane
the only thing it wont come with is a transponder and Sanwa RX 472 micro
if you need those also add $100 for each
if you want any more photos or info just ask i can sms to you